2018-08-03
15:07 |
A High-performance Track Fitter for Use in Ultra-fast Electronics
/ Clement, Emyr John (Bristol U.) ; De Mattia, Marco (Texas A-M) ; Dutta, Suchandra (Saha Inst.) ; Eusebi, Ricardo (Texas A-M) ; Fu, Yu (Florida U.) ; Hahn, Kristan Allan (Northwestern U.) ; Hu, Zhen (Fermilab) ; Jindariani, Sergo (Fermilab) ; Konigsberg, Jacobo (Florida U.) ; Liu, Tiehui Ted (Fermilab) et al.
This article describes a new charged-particle track fitting algorithm designed for use in high-speed electronics applications such as hardware-based triggers in high-energy physics experiments.
Following a novel technique designed for fast electronics, the positions of the hits on the detector are transformed before being passed to a linearized track parameter fit. [...]
CMS-NOTE-2018-003; CERN-CMS-NOTE-2018-003.-
Geneva : CERN, 2018 - 15 p.
Fulltext: PDF;
|
Details des Eintrags - Ähnliche Datensätze
|
2018-05-07
10:49 |
Front-side biasing of n-in-p silicon strip detectors
/ Baselga Bacardit, Marta (KIT, Karlsruhe, EKP) ; Bergauer, Thomas (Vienna, OAW) ; Dierlamm, Alexander Hermann (KIT, Karlsruhe, EKP) ; Dragicevic, Marko Gerhart (Vienna, OAW) ; Konig, Axel (Vienna, OAW) ; Pree, Elias (Vienna, OAW) ; Metzler, Marius (KIT, Karlsruhe, EKP)
Front-side biasing is an alternative method to bias a silicon sensor. Instead of directly applying high voltage to the back-side, one can exploit the conductive properties of the edge region to bias a detector exclusively via top-side connections. [...]
CMS-NOTE-2018-002; CERN-CMS-NOTE-2018-002.-
Geneva : CERN, 2018 - 23 p.
Fulltext: PDF;
|
Details des Eintrags - Ähnliche Datensätze
|
2018-03-20
10:05 |
Details des Eintrags - Ähnliche Datensätze
|
2017-10-20
16:53 |
Details des Eintrags - Ähnliche Datensätze
|
2017-10-09
10:39 |
An FPGA based track finder for the L1 trigger of the CMS experiment at the High Luminosity LHC
/ Tomalin, Ian (Rutherford) ; Ardila Perez, Luis Eduardo (KIT, Karlsruhe, IPE) ; Ball, Fionn Amhairghen (Bristol U.) ; Balzer, Matthias Norbert (KIT, Karlsruhe, IPE) ; Boudoul, Gaelle (Lyon, IPN) ; Brooke, James John (Bristol U.) ; Caselle, Michele (KIT, Karlsruhe, IPE) ; Calligaris, Luigi (Rutherford) ; Cieri, Davide (Rutherford) ; Clement, Emyr John (Bristol U.) et al.
A new tracking detector is under development for use by the CMS experiment at the High-Luminosity LHC (HL-LHC). A crucial requirement of this upgrade is to provide the ability to reconstruct all charged particle tracks with transverse momentum above 2-3 GeV within 4$\mu$s so they can be used in the Level-1 trigger decision. [...]
CMS-NOTE-2017-009; CERN-CMS-NOTE-2017-009.-
Geneva : CERN, 2017-12-14 - 43 p.
- Published in : JINST 12 (2017) P12019
Fulltext: PDF; External link: IOP Open Access article
|
Details des Eintrags - Ähnliche Datensätze
|
2017-09-15
11:43 |
Characterisation of Irradiated Thin Silicon Sensors for the CMS Phase II Pixel Upgrade
/ Centis Vignali, Matteo (Hamburg U.) ; Eckstein, Doris (DESY) ; Eichhorn, Thomas (DESY) ; Garutti, Erika (Hamburg U.) ; Junkes, Alexandra (Hamburg U.) ; Steinbrueck, Georg (Hamburg U.) ; bigskip ; Institut fur Experimentalphysik ; Luruper Chaussee ; Hamburg et al.
The high luminosity upgrade of the Large Hadron Collider, foreseen for 2025, necessitates the replacement of the CMS experiment's silicon tracker.
The innermost layer of the new pixel detector will be exposed to severe radiation, corresponding to a 1 MeV neutron equivalent fluence of up to $\Phi_{eq} = 2 \times 10^{16}$ cm$^{-2}$, and an ionising dose of $\approx 5$ MGy after an integrated luminosity of 3000 fb$^{-1}$.
Thin, planar silicon sensors are good candidates for this application, since the degradation of the signal produced by traversing particles is less severe than for thicker devices.
In this paper, the results obtained from the characterisation of 100 and 200\,$\mu$m thick p-bulk pad diodes and strip sensors irradiated up to fluences of $\Phi_{eq} = 1.3 \times 10^{16}$ cm$^{-2}$ are shown..
CMS-NOTE-2017-008; CERN-CMS-NOTE-2017-008.-
Geneva : CERN, 2016 - 17 p.
Fulltext: PDF;
|
Details des Eintrags - Ähnliche Datensätze
|
2017-09-11
11:10 |
The drift velocity monitoring system of the CMS barrel muon chambers
/ Altenhoefer, Georg Friedrich (Julich, Forschungszentrum) ; Hebbeker, Thomas (Aachen, Tech. Hochsch.) ; Heidemann, Carsten Andreas (Aachen, Tech. Hochsch.) ; Reithler, Hans (Aachen, Tech. Hochsch.) ; Sonnenschein, Lars (ADU cologne GmbH, Cologne) ; Teyssier, Daniel Francois (Aachen, Tech. Hochsch.)
The drift velocity is a key parameter of drift chambers. Its value depends on several parameters: electric field, pressure, temperature, gas mixture, and contamination, for example, by ambient air. [...]
CMS-NOTE-2017-007; CERN-CMS-NOTE-2017-007.-
Geneva : CERN, 2018 - 8 p.
- Published in : Nucl. Instrum. Methods Phys. Res., A 888 (2018) 1-8
Fulltext: PDF;
|
Details des Eintrags - Ähnliche Datensätze
|
2017-06-22
17:07 |
Thin Double-gap RPCs for the Phase-2 Upgrade of the CMS Muon System
/ Lee, Kyong Sei (Korea U.) ; Park, Sung Keun (Korea U.)
High-sensitive double-gap phenolic Resistive Plate Chambers are studied for the Phase-2 upgrade of the CMS muon system at high pseudorapidity $\eta$. Whereas the present CMS RPCs have a gas gap thickness of 2 mm, we propose to use thinner gas gaps, which will improve the performance of these RPCs. [...]
CMS-NOTE-2017-006; CERN-CMS-NOTE-2017-006.-
Geneva : CERN, 2017 - 10 p.
Fulltext: PDF;
|
Details des Eintrags - Ähnliche Datensätze
|
2017-06-22
11:22 |
Thin Double-gap RPCs for the Phase-2 Upgrade of the CMS Muon System
/ Lee, Kyong Sei (Korea U.) ; Park, Sung Keun (Korea U.)
High-sensitive double-gap phenolic Resistive Plate Chambers are studied for the Phase-2 upgrade of the CMS muon system at high pseudorapidity $\eta$. Whereas the present CMS RPCs have a gas gap thickness of 2 mm, we propose to use thinner gas gaps, which will improve the performance of these RPCs. [...]
CMS-NOTE-2017-005; CERN-CMS-NOTE-2017-005.-
Geneva : CERN, 2017 - 10 p.
Fulltext: PDF;
|
Details des Eintrags - Ähnliche Datensätze
|
2017-06-06
10:17 |
Object definitions for top quark analyses at the particle level
/ CMS Collaboration
/CMS Collaboration
The definition of the top quark at the particle level (pseudo-top) is discussed as a fundamental aspect of performing current and future measurements of differential production cross sections in both $\mathrm{t}\overline{\mathrm{t}}$ and single top quark production.
Starting from initial studies performed in the context of the LHCtopWG, an optimization of the definition of pseudo-tops is proposed in order to maximize the correlation of the reconstructed quantities with the parton-level definition.
The implementations and their optimization are performed using RIVET as a common framework to avoid the introduction of a dependence on a specific Monte Carlo event generator..
CMS-NOTE-2017-004; CERN-CMS-NOTE-2017-004.-
Geneva : CERN, 2017 - 26 p.
Fulltext: PDF;
|
Details des Eintrags - Ähnliche Datensätze
|
|
|