CERN Accelerating science

HL-LHC Conference Papers

უკანასკნელი დამატებები:
2024-10-11
07:15
Design, manufacturing and validation of the new quench heater discharge power supplies for the protection of superconducting magnets for the High-Luminosity LHC Project at CERN / Carrillo, David (CERN) ; Berberat, Raphael (CERN) ; Georgakakis, Spyridon (CERN) ; Guasch-Martinez, Josep (CERN) ; Lopez Cordoncillo, Denisse (CERN) ; de Nicolás Lumbreras, Enrique (CERN) ; Nowak, Edward (CERN) ; Papamichali, Maria (CERN) ; Pojer, Mirko (CERN) ; Rodriguez Mateos, Felix (CERN) et al.
The Quench Heater Discharge Power Supplies (HDS) are magnet protection devices installed in the Large Hadron Collider (LHC) that, upon detection of a magnet quench, release energy into strip heaters that are in thermal contact with the superconducting coils, inducing a resistive transition all along the coils. The new HDS design for protection of the High Luminosity LHC (HL-LHC) Inner Triplet magnets calls for a more advanced design with up-to-date components resulting in a high reliability of the HDS units. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) THPG52 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.THPG52

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-11
07:10
Hardware Commissioning of the HL-LHC Inner Triplet String Facility at CERN: Individual System and Short Circuit Tests / Yammine, Samer (CERN) ; Antoine, Alain (CERN) ; Onufrena, Aleksandra (CERN) ; Perin, Antonio (CERN) ; Panev, Bozhidar Ivanov (CERN) ; Bozzini, Davide (CERN) ; Coulot, Emilien (CERN) ; Thiesen, Hugues (CERN) ; Zerlauth, Markus (CERN) ; Bajko, Marta (CERN) et al.
The goal of the High Luminosity-Large Hadron Collider (HL-LHC) Inner Triplet (IT) String test, is to validate the assembly and connection procedures and tools required for its construction, to assess the collective behavior of the superconducting magnet chain in conditions as close as possible to those of their operation in the HL-LHC and to provide a training opportunity for the equipment teams for their work in the LHC tunnel. The IT String includes the systems required for operation at nominal conditions, such as the cryogenics, powering and quench protection systems. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) THPS50 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.THPS50

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-09
15:10
Design, manufacturing and validation of the CLIQ units for the protection of superconducting magnets for the High-Luminosity LHC project at CERN / Carrillo, David (CERN) ; Berberat, Raphael (CERN) ; Favre, Mathieu (CERN) ; Georgakakis, Spyridon (CERN) ; Guasch-Martinez, Josep (CERN) ; Lopez Cordoncillo, Denisse (CERN) ; de Nicolás Lumbreras, Enrique (CERN) ; Nowak, Edward (CERN) ; Pojer, Mirko (CERN) ; Rodriguez Mateos, Felix (CERN) et al.
The novel Coupling-Loss-Induced-Quench (CLIQ) concept will be part of the quench protection system of the superconducting Inner Triplet magnets of the High Luminosity Large Hadron Collider (HL-LHC) upgrade at CERN. Several units of two distinct CLIQ prototype variants were produced to validate the CLIQ protection concept and define the system parameters for the required performance. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) THPG51 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.THPG51

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-09
15:10
SPS injection kicker system: 2023 operational experience and upgrade proposals for high-luminosity LHC / Favia, Giorgia (CERN) ; Zannini, Carlo (CERN) ; Standen, Dylan (CERN) ; Velotti, Francesco (CERN) ; Ducimetière, Laurent (CERN) ; Feliciano, Luis (CERN) ; Barnes, Michael (CERN) ; Diaz Zumel, Miguel (CERN) ; Trubacova, Pavlina (CERN) ; Kramer, Thomas (CERN) et al.
The SPS injection kicker system comprises twelve MKP-S (small aperture) modules and four MKP-L (large aperture) modules. An upgraded MKP-L magnet was installed in the SPS, during December 2022, in view of the higher beam intensity needed in the future for High-Luminosity-LHC. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) TUPC38 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPC38

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-09
15:10
HL-LHC magnet production: building a complex planning to identify bottlenecks / Fleury, Sarah (CERN) ; Todesco, Ezio (CERN) ; Barberan Marin, Maria (CERN) ; Bernardini, Marzia (CERN)
The High-Luminosity LHC project aims to enhance the integrated luminosity of the LHC machine by a factor of 10, by upgrading various components located in the LHC tunnel just before the collision points, with cutting-edge technologies. Among these innovations are the new superconducting magnets equipped with a combination of $Nb-Ti$ and $Nb_3Sn$. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) TUPS08 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPS08

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-09
15:10
Schedule management for large scale projects: the example of HL-LHC at CERN / Vergara Fernandez, Estrella (CERN) ; Barberan Marin, Maria (CERN) ; Bernardini, Marzia (CERN) ; Fleury, Sarah (CERN)
The High Luminosity Large Hadron Collider (HL-LHC) project seeks to significantly enhance the performance of the LHC to deliver ten times more data to the LHC Experiments. The project relies on cutting-edge systems and technologies deployed in the new facilities constructed to the HL-LHC requisites and replacing large existing equipment and systems in the LHC tunnel. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) TUPS07 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPS07

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-09
15:10
HL-LHC series collimators: key technical requirements, crucial production challenges and risk mitigation plan / Piccinni, Carla (CERN) ; Perillo Marcone, Antonio (CERN) ; Senajova, Dominika (CERN) ; Baillard, Dylan (CERN) ; Grenier-Boley, Edouard (CERN) ; Nuiry, Francois-Xavier (CERN) ; Calviani, Marco (CERN) ; Seidenbinder, Regis (CERN) ; Redaelli, Stefano (CERN)
In view of High Luminosity (HL) - Large Hadron Collider (LHC) project, an upgraded collimation system has been developed to accommodate a rise of ten times of the integrated luminosity compared to the LHC. A new series of collimators will be produced and installed in the machine during the Long Shutdown 3 (LS3) to take place during 2026-2028. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) TUPC75 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPC75

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-09
15:10
Initial operational experience of an LHC injection kicker magnet upgraded for HL-LHC / Barnes, Michael (CERN) ; Diaz Zumel, Miguel (CERN) ; Bracco, Chiara (CERN) ; Standen, Dylan (CERN) ; Favia, Giorgia (CERN) ; Ducimetière, Laurent (CERN) ; Trubacova, Pavlina (CERN) ; Kramer, Thomas (CERN) ; Stadlbauer, Tobias (CERN) ; Gomes Namora, Vasco (CERN)
The intensity of the HL-LHC beam will be twice that of LHC. Hence, an upgrade of the LHC injection kickers (MKIs) is necessary for HL-LHC to avoid excessive beam induced heating of the MKIs. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) TUPC36 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPC36

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-08
07:55
Status of beam-beam studies for the high-luminosity LHC / Droin, Colas (CERN) ; Sterbini, Guido (CERN) ; Efthymiopoulos, Ilias (CERN) ; Mounet, Nicolas (CERN) ; De Maria, Riccardo (CERN) ; Tomas, Rogelio (CERN) ; Kostoglou, Sofia (CERN)
Optimizing the configuration of an operational cycle of a collider such as the LHC is a complex process, requiring various simulation studies. In particular, Dynamic Aperture (DA) simulations, based on particle tracking, serve as indispensable tools for achieving this goal. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) THPC77 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.THPC77

დეტალური ჩანაწერი - მსგავსი ჩანაწერები
2024-10-08
07:54
Sorting strategies for the new superconducting magnets for the CERN HL-LHC / Pugnat, Thomas (CERN) ; Wegscheider, Andreas (CERN) ; Todesco, Ezio (CERN) ; Giovannozzi, Massimo (CERN) ; Tomas, Rogelio (CERN)
In a circular collider, precise control of the linear optics in the vicinity of the interaction points plays a crucial role in ensuring optimal operational performance and satisfying the machine protection constraints. Superconducting magnets are affected by unavoidable field errors that impact machine performance, and mitigation strategies are usually put in place to improve the situation. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) THPC16 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.THPC16

დეტალური ჩანაწერი - მსგავსი ჩანაწერები