SPS and CNGS

Ultimi arrivi:
2019-07-17
12:06
 Numerical and experimental studies to model and reduce the impedance in the CERN Super Proton Synchrotron (SPS) / Beck, Mario Intensity-driven beam instabilities are studied in simulations with a refined impedance model and in experimental measurements for this thesis. The High Luminosity Large Hadron Collider (HL-LHC) project at CERN aims for an increase in the integrated luminosity in the Large Hadron Collider (LHC). [...] CERN-THESIS-2018-433.- 181 p. Fulltext: PDF; External link: Approve this document (restricted)

2019-07-17
09:29
 Q drift during debunching time / Meer, S van der CERN-SPS-Tech-Note-76-077-APS ; SPS-PS-Int-Note-76-77. - 1976. - 5 p. Full text

2019-07-08
15:48
 Synchrotron light sources and free-electron lasers : accelerator physics, instrumentation and science applications / Jaeschke, Eberhard (ed.) ; Khan, Shaukat (ed.) ; Schneider, Jochen (ed.) ; Hastings, Jerome (ed.) Hardly any other discovery of the nineteenth century did have such an impact on science and technology as Wilhelm Conrad Röntgen’s seminal find of the X-rays [...] Cham : Springer, 2019.

ebook
Purchase it for me!
2019-07-06
05:04
 Layouts for fixed-target experiments and dipole moment measurements of short-living baryons using bent crystals at the LHC / Mirarchi, D. (CERN ; Manchester U.) ; Fomin, A.S. (CERN ; Kharkov, KIPT) ; Redaelli, S. (CERN) ; Scandale, W. (CERN) Several studies are on-going at CERN in the framework of the Physics Beyond Collider study group, with main aim of broadening the physics research spectrum using the available accelerator complex and infrastructure. [...] arXiv:1906.08551. - 17 p. Fulltext

2019-07-04
10:31
 The Superconducting Super Proton Synchrotron / Dyks, Luke Aidan In order to continue pushing the frontiers of high energy physics, a future circular hadron collider, FCC-hh has been proposed [...] CERN-THESIS-2019-072 - 71 p.

Full text
2019-07-03
06:10
 The ENUBET narrow band neutrino beam / Pupilli, F (INFN, Padua) ; Acerbi, F (Fond. Bruno Kessler, Povo ; TIFPA-INFN, Trento) ; Ballerini, G (INFN, Milan Bicocca ; Insubria U., Como) ; Bonesini, M (INFN, Milan Bicocca) ; Brizzolari, C (INFN, Milan Bicocca ; Insubria U., Como) ; Brunetti, G (INFN, Padua) ; Calviani, M (CERN) ; Carturan, S (INFN, Legnaro) ; Catanesi, M G (INFN, Bari) ; Cecchini, S (INFN, Bologna) et al. ENUBET has been conceived to monitor positrons from $K_{e3}$ decays in conventional neutrino beam decay tunnels in order to provide a direct determination of the $\nu_e$ flux at the source, paving the way to a measurement of electron neutrino cross section with 1% precision. Since 2016 remarkable results on the prototyping and testing of the tunnel instrumentation for positron tagging have been achieved, as well as on the design and simulation of the proton extraction scheme, the focusing system and the meson transfer line. [...] SISSA, 2019 - 5 p. - Published in : PoS NOW2018 (2018) 030 Fulltext: PDF; External links: 00001 Scheme of the baseline UCM. It is composed by five, 15 mm thick, iron layers interleaved by 5 mm thick plastic scintillator tiles. The total length of the module (10 cm) and its transverse size (3 $\times$ 3 cm$^{2}$) corresponds to 4.3 $X_{0}$ and 1.7 Moliere radii, respectively; 00002 Pictures of the polysiloxane-based (a) and lateral scintillation light readout (b) calorimeter prototypes.; 00000 Pictures of the polysiloxane-based (a) and lateral scintillation light readout (b) calorimeter prototypes.; PoS server In : Neutrino Oscillation Workshop 2018, Ostuni, Brindisi, Italy, 9 - 16 Sep 2018, pp.030

2019-07-03
06:10
 The SPS and an alternative ring design as pre-booster of FCC $e^+e^−$ injector / Etisken, O (CERN ; Ankara U.) ; Papaphilippou, Y (CERN) ; Antoniou, F (CERN) ; Ciftci, A K (Izmir U. Economics, Izmir) The FCC-e+ e− injector complex needs to produce and to transport a high-intensity e+/e− beam at a fast repetition rate for topping up the collider at its collision energy. Two different options are under consideration as pre-accelerator before the bunches are transferred to the high-energy booster: using the existing SPS and a completely new ring. [...] 2018 - 6 p. - Published in : AIP Conf. Proc. 2042 (2018) 020043 In : 34th International Physics Congress of the Turkish Physical Society, Bodrum, Turkey, 5 - 9 Sep 2018, pp.020043

2019-07-02
06:09
 Analysis and Evaluation of the CERN Reference Systems / Ibarrola, N (CERN) ; Jones, M (CERN) The work that will be presented has been driven mainly by the Future Circular Collider (FCC) study, a proposed next-generation particle collider with a circumference of 100 km and the aim of reaching collision energies of 100 T e V. The new machine would be located in Swiss and French territories, and it would cover more than 10 times the area of the existing LHC facilities. [...] 2016 - 4 p. - Published in : (2016) Fulltext: PDF; In : International Workshop on Accelerator Alignment, Grenoble, France, 3 - 7 Oct 2016

2019-07-02
06:09
 Status and Experience with the Alignment of LINAC4 / Fuchs, Jean-Frederic (CERN) LINAC4 (L4) is an H-linear accelerator that will deliver, for the High Luminosity LHC (HL-LHC) project requirements, a beam of protons at 160 MeV energy to the PS complex and then to the LHC. Its connection to the PS booster will take place during the Long Shutdown 2 (LS2) in 2019-2020 or earlier if any major failure of the LINAC2. [...] 2016 - 6 p. - Published in : (2016) Fulltext: PDF; In : International Workshop on Accelerator Alignment, Grenoble, France, 3 - 7 Oct 2016

2019-07-02
06:09
 The HESR Stochastic Cooling System, Design, Construction and Test Experiments in COSY / Stassen, Rolf (Julich, Forschungszentrum) ; Breitkreutz, Bernd (Julich, Forschungszentrum) ; Shurkhno, Nikolay (Julich, Forschungszentrum) ; Stockhorst, Hans (Julich, Forschungszentrum) ; Thorndahl, Lars (CERN) The construction phase of the stochastic cooling tanks for the HESR has started. Meanwhile two pickups (PU) and one kicker (KI) are fabricated. [...] 2018 - 5 p. - Published in : 10.18429/JACoW-COOL2017-THA11 Fulltext: PDF; In : 11th COOL Workshop, Bonn, Germany, 18 - 22 Sep 2017, pp.THA11