CERN Accelerating science

Guía d'administración de WebSubmit

Disclaimer: Though this guide provides all the necessary information to start learning WebSubmit from scratch and reach a good level in administrating it, this guide is not yet fully complete, and might contain information that has not been strictly verified (sample codes are for eg. provided "AS IS", only to offer some guidance to the admin).
Specific topics would gain to be more developed, such as HOW-TOs, sample workflows (for eg. approval workflows and referee management). At this point the demo submissions that come standard with the Atlantis demo site remain essential companions to this guide.
Contributions are welcome (for eg. sample workflows, function descriptions, etc.)

Contents

    (Check out the old WebSubmit admin guide)

1. Overview

1.1 How WebSubmit Works

WebSubmit provides the infrastructure to set up customized pages for your users to submit new metadata and files to your repository. It is highly flexible in order to accomodate to the various type of documents that you might need to archive. As a consequence of this flexibility, it requires a good level of understanding of the concepts behind WebSubmit.

A simplied schema of a typical WebSubmit workflow is the following one (figure 1): one or several pages are presented to the user to enter some information, such as title of the document, authors, etc. Each of these pages contain a form with one or several WebSubmit elements, which can either display some information to the user, or ask for input from the user. WebSubmit elements are described more in detailed further below. After the user has finished filling the forms on all pages, a series of WebSubmit functions are called. These functions will typically (1) post-process the data, (2) create a MARCXML, (3) upload the created MARCXML file, and (4) send confirmation email(s).

One thing worth to learn from this simple workflow is that (1) functions are executed one after each other, (2) that each function can have side effects, such as sending email, and that (3) the output of these functions is displayed to the user. Typical submissions use many side-effect functions, and only one function that give some feedback to the user (in the form of a web page). Also most submissions usually need only a single page.

Finally note that you can plug check on each field of a page, so that the user cannot proceed further if some invalid text has been input.

Functions are also organized in steps (Figure 2). By default, WebSubmit runs the "step 1 block" and then stops: to run the next steps one must have a function at the end of step 1 that jump to another block (for eg. CaseEDS function) or have a WebSubmit element that set the input form "step" to the value of the block number (such as "Create_Modify_Interface" function).

A set of WebSubmit functions comes installed by default in Invenio, to provide all the necessary functionalities to create your own workflow. The behaviour of these functions can be customized through their parameters. Advanced users can also create their own functions in Python (see further below in this guide). The main difficulty for beginners is to pick the adequate function and carefully choose their ordering. It is recommended to get inspiration from the sample demo submission at first.

It is particulary important at this point to understand that the WebSubmit engine more or less limits to 1) displaying page to collect data, and 2) run functions. It does not take care of building a record and inserting it into a collection, but expects to have a set of functions configured to do so.

Such a multi-page submission could appear to users as shown in figure 4. Note that this figure shows a special page 0. This "cover" page is mandatory for all submissions, and is automatically generated by WebSubmit. It can be customized to 1) display a description of the submission, 2) show the available "actions" (described further below) and 3) let the users chose among the available "categories" (described further below).

Page "0"   Page 1   Page 2   Functions ouput

Indeed, typical submissions do not contain only one, but several independant workflows called "actions": one action might be dedicated to the submission of a document, while another one will let the user modify a previously submitted record. Different actions can therefore display different sets of pages and call different post-processing functions. The first page of a submission (page "0") will let users chose among the offered actions.
By convention we use 3-letters names for the actions of a submission. For example:

Actions are displayed as several buttons (blue by default) for users to choose from to start a new submission (Figure 6):

Figure 6 also shows the possibility to select among various categories prior to jumping into one of the available actions. These categories usually don't have a direct impact on the chosen workflow. Think of them simply as a simple WebSubmit element place on the first page, that is common to all the actions of your submission (indeed you could set up your submissions to have such categories inside your submission actions pages, but that would require additional work).

Last, but not least, a submission is usually referred to by a short name (at most 5 letters), reused in many places in the WebSubmit admin interface.

To summarize:

Another concept remains to be explained, but this functionality tends to disappear from submissions, and might be deprecated at some point. We provide the explanation about it below only for completeness, but it is strongly discouraged to go that way:

It is possible to group actions in sets: an action set is a succession of actions which should be done in a given order when a user starts.
For example the submission of a document can be composed of two actions: Submission of Bibliographic Information (SBI) and Fulltext Transfer (FTT) which should be done one after the other.
When the user starts the submission, we want the submission to get him first in SBI and when he finishes SBI to carry him to FTT. SBI and FTT are in this case in the same action set. They will both have a level of 1 ("level" is a bad name, it should be "action set number"), SBI will have a score of 1, and FTT a score of 2 (which means it will be started after SBI). If you set the stpage of FTT to 2, the user will be directly carried to the 2nd page of the FTT web form. This value is usually set to 1.
The endtxt field contains the text which will be displayed to the user at the end of the first action (here it could be "you now have to transfer your files")
A single action like "Modify Bibliographic Information" should have the 3 columns to 0,0 and 1.

1.2 Behind the scenes

This section highlights a few key behaviours of WebSubmit which are particularly important to understand when designing a submission.

When a user starts a new submission, a working directory is created on disk in order to store all the collected values. This working directory is usually called the "curdir". It is located in a subdirectory of /opt/invenio/var/data/submit/storage/{action directory}/{submission code}/{submission access number} where {submission code} is the short name of a submission and {submission access number} is a unique submission session identifier (displayed on the web submission interface as the submission number).{action directory} is running for SBI actions, modify for "MBI" actions, revise for "SRV" actions, etc. (This is configured in the "Actions" part of the WebSubmit admin interface)
Whenever the user moves from one page to the other, or submit the form, the curdir is populated with files named after the submission elements displayed on the page, with their content being the user inserted values (User uploaded files can be found by default in the curdir/files/ directory). It is these files that WebSubmit functions such "Create_Record" or "Modify_Record" will use in order to create the MARCXML to upload (Note that the output of these functions will be a file named "recmysql" in the curdir, that will contain the MARCXML to upload)

The curdir contains a few other additional files:

The path to the curdir can sometimes be slightly different, depending on the chosen action. For eg. the SRV action will use /opt/invenio/var/data/submit/storage/revise/{submission code}/{submission access number} where {submission code}

When the functions will run they will most probably create additional files, such as "SN" created by the "Create_Recid" function which reserves a record id, "RN" created by function "Report_Number_Generation" to reserve a report number, or the "recmysql" file already mentionned above. Many of these output file then become input parameters for the next functions to be executed. This shows the importance of running a well defined set of functions in a well defined order.

The curdir is not removed after the end of the submission. This gives you the opportunity to keep track of past submissions in case something would have gone unexpected. However the use of the "Move_to_Done" function will create a zipped archive of this directory (+ rename it using the report number of the record, found in file curdir/RN), and will move it to a different directory, /opt/invenio/var/data/submit/storage/done/running/.

2. Configure Submissions: a Tutorial

This chapter is a quick walkthrough for creating your submission. It is not trying to explain everything, but simply goes through the main steps necessary to configure a submission.

2.1 Creating the submission

1. Go to the WebSubmit admin interface and click on the "Add New Doctype" button at the bottom of the screen. Give your submission an ID (eg. DEMOTEST. This cannot be changed later and should be kept short. It is used in URLs to link to your submission), a name and a description. The name and the description will be displayed on the users end. The description can contain HTML markup. You can also choose to clone from an already existing submission so that existing configuration for pages, functions, elements, etc. are copied over to your new submission (this might be not wanted if the submission you copy from include submission specific elements).

2. From the submission page, select from the "Add a new Submission" menu the action to add to your newly created submission. For eg. select "[SBI] Submit New Record" to create an action that will allow users to submit new documents. Press the "Add Submission" button to add the chosen action. You are given the possibility to clone the configuration from another existing submission. Start with a blank one or choose an existing one, then press "Continue".

3. On the following page, fill in the form:

Once done, press the "Save Details" button.

4. (Optional) Repeat steps 2 and 3 for any other workflow you want to support in your submission. If the action you want to add is not part of the list, click on the available actions menu, press the "Add Action" button and enter the "action code" (for eg. SBI), "description" (displayed as the page title when going through the submission pages), "dir" (in which subdirectory of the default base submission folder the running/done submissions for this action will be saved, for eg. submit), and "status text" (displayed as the label for the action button on the main submission interface). Press Save Details, and you are ready to use this action.

5. (Optional) To propose a list of categories on the splash page (page 0) of your submission, select your submission from the main WebSubmit admin interface, scroll down to the "Categories" section on the page, enter a new category, with "ID" being the key code of the new category you want to add (this value will be saved in the corresponding file in curdir directory of your submission. Reminder: the file in curdir containing this value will be named comboDEMOTEST, provided that "DEMOTEST" is your submission ID) and "description" being the value displayed to the user for this category. Press "Add Category" to add the category.

6. (Optional) To enter the list of persons that will be recognized as referees of a submission (for eg. by the "Is_Referee" function), select your submission from the main WebSubmit admin interface, scroll down to the "Manage Referees" section on the page, and click on the "Manage Referees" button.
Select the user(s) from the list (users must have an account on the system), choose which category they manage, and click "Add". Once done, click "Finished".

7. The skeleton of your submission is now basically ready. You will need to add new pages to it, as well as insert post-processing functions. These steps are defined in the next sections. What you can do now is to make the submission visible on the main submissions users page. To do so, click on the Organise Main Page of the main menu, select your submission in the "Document Type Name" menu, choose from the next menu to which branch of the submission tree you want to attach this submission, and press "Add". Reorganize the tree as wanted from this interface.

2.2 Building the interface

1. Go to the main WebSubmit admin interface and select your submission. Choose the action (SBI, MBI, etc.) for which you want to build the interface and click on the corresponding "view interface" link.

2.If you want to add a new page, click on the "Add a Page" button. Follow the "view page" link displayed next to the newly created page, or the one next to the page you want to modify.

3. To add a new field on the page, press the "Add a Field" button (at the bottom of the screen). On the following page:

Once done, hit the "Add Field" button.
Note that this step is simply instantiating a WebSubmit element to include on your page. If you want to include a field that does not exist in the available elements, you should first create it. Learn more about the creation of WebSubmit elements in the WebSubmit Elements chapter of this guide.

4.Repeat step 3 as many times as needed. You can reorder the fields on the page, remove them or change their attribute. The "edit" link next to each field will let you change its attributes. The "element" link will however let you change the attribute of the WebSubmit element itself, i.e. affecting all the submissions having such a field on their page.

5. You can preview the page by pressing the "View Page Preview" button at the top of the page. Note that Response Elements will however not be previewed.

6. From the "page" interface you can go back successively to the action interface and the main submission interface by clicking on the "Finished" buttons at the bottom of the pages.

2.3 Adding the functions

1. Go to the main WebSubmit admin interface and select your submission. Choose the action (SBI, MBI, etc.) for which you want to build the interface and click on the corresponding "view functions" link.

2. To insert a function into the workflow, press the "Add a Function" button at the bottom of the screen. On the following page:

Once done, hit the "Save Details" button.
Note that this step is simply inserting an already existing WebSubmit function in your workflow. If you want to include a totally new function you should first create it. Learn more about the creation of WebSubmit functions in the WebSubmit Functions chapter of this guide.

3. Once the function is inserted you can change its parameters by clicking on the "View parameters" link. Each function has a different set of parameters. Check the function documentation (available from the Available Functions menu of the WebSubmit admin interface) to learn more about the offered options.

4. Repeat steps 2 and 3 as many times as needed. You can reorder the functions on the page or remove them.

2.4 Restricting the submission

Access to the submission interface is mostly restricted via the WebAccess module. You can check out the Access Restrictions chapter of this guide and refer to the WebAccess admin guide for detailed information.

In addition to WebAccess you can use the following functions to restrict your submission:

If you have set up an action that requires to modify an existing record (to add file, modify metadata, etc.) you can add the "Is_Original_Submitter" function in order to only let the original submitter of the record modify the record. This function must be added at the beginning of your list of functions (usually after the "Get_Recid" function), for each action, and each step. Check out the Adding the functions section of this guide to learn how to add this function to your workflow.

You can also use the "User_is_Record_Owner_or_Curator" function to enable access to the original submitter of the record AND users connected to a specific WebAccess role.

If you have set up an action (for eg. "APP") that requires to approve a document by a referee (defined in the list of referees for your submission) you can add the "Is_Referee" function in order to only let the referee go through. This function must be added at the beginning of your list of functions (usually after the "Get_Recid" function), for each action, and each step. Check out the Adding the functions section of this guide to learn how to add this function to your workflow.

3. WebSubmit Elements

WebSubmit elements are the building blocks of submission pages. This section focuses on how to use or create them. Refer to the overview of this guide to learn more about the concept of WebSubmit elements.

3.1 Existing elements

The list of existing elements can be found in the "available elements" section of the WebSubmit admin interface. By default these elements are instances used in the demo submissions. You can reuse them, but it is recommended to create new elements to use in your own submissions, excepted for complex "response" elements that are generic enough.

Once instantiated for a submission, elements become fields on the submission page. It is important to make a difference between the fields attributes, which are submission specific, and the element attributes, which apply to all submission using them.

3.2 Creating a new element

This section describes the creation of a customized element. It does not show how to add an already existing element to your submission. Refer to the Tutorial to learn how to add an existing element to your submission.

To create a new element, go to the the "available elements" section of the WebSubmit admin interface, scroll down to the bottom of the page and press the "Add New Element" button.

Fill in the form:

Once done, hit the "Save Details" button. You are done with the creation of your element. You can then add it to your submission page.

About element names: some names are "reserved", and should not be used as names for elements, as they would overlap with filenames created internally by WebSubmit in the submission directory (curdir). You can still use these element names, but should be aware of the potential side effects of changing such variables with user submitted values. An up-to-date list of reserved filenames for your installation can be found by running python -c 'from invenio.websubmit_config import CFG_RESERVED_SUBMISSION_FILENAMES;print CFG_RESERVED_SUBMISSION_FILENAMES'.

3.2.1 User Defined Input Elements

This element is simply displaying the the content defined in the field "Element Description". The content must be HTML-escaped (or can be HTML). This is element is not really suitable for user-input values.

3.2.2 File Input Elements

The element displays a basic control to upload files. The file uploaded with this element can be found upon submission inside [..]/files/ELEMENT_NAME/ (where ELEMENT_NAME is your element name, for eg. DEMOART_FILE) within the submission directory.

You can then further process the uploaded file with relevant WebSubmit functions (eg. stamp the file), and attach it to the record (see section 5. File Management with WebSubmit of this guide).

3.2.3 Hidden Input Elements

Simply create an hidden input field, with the value defined in the "Value" field of the element. The uploaded value can be found as any other element in the submission directory upon submission of the form.

The main usage of this field is to upload a statically defined value in order to check if the form has already been submitted. Static values to be part of the record would better be defined in the BibConvert configuration file used to create the record.

3.2.4 Text Input Elements

A simple text input field, Nothing much to say about it excepted that it is usually the most used of all elements.

3.2.5 Response Elements

Response elements are elements evaluated at runtime, which execute the Python code they embed. These elements are useful when you need to display complex controls that are not supported by default by WebSubmit, or if you need to generate content dynamically. The returned output (displayed on the submission form) of response elements is the one defined at the end of the execution in the "text" variable.
For eg. to display a radio button one would write:

text = ""
options = [1, 2, 3]
for option in options:
    text += '<input type="radio" name="group1" id="%(opt)i" value="%(opt)i"><label for="%(opt)i">Option %(opt)i</label>' % {'opt': option}
which would display as:

Upon submission of the form, a file named "group1" would be created in that case with the chosen value in the submission directory.

Response elements have "magically" access to some global variables, provided that they have been set at the moment of executing the element:

When defining a response element you should be aware of a few traps:

A possible skeleton for a response element could be: (FIXME: Check...)

import os
from invenio.websubmit_functions.ParamFile import ParamFromFile
from invenio.search_engine_utils import get_fieldvalues

this_element_name = "DEMOART_TEST" # This would be your element name

if act == "SBI" and not os.path.exists(os.path.join(curdir, this_element_name)):
    default_value = "A default value" # or any default value
elif act == "MBI" and not os.path.exists(os.path.join(curdir, this_element_name)):
    default_value = get_fieldvalues(sysno, '245__a')
else:
    default_value = ParamFromFile(os.path.join(curdir, this_element_name))

text = '<input type="text" name="%s" value="%s"/>' % (this_element_name, default_value)

Since response element needs the submission context and can possibly have side effects, they are never executed when previewing your submission pages from the WebSubmit admin interface.

3.2.6 Select Box Elements

Select Box elements are used to display lists menus (either as dropdown menu or multiple selection list). The element is not smart enough to save you from specifying the HTML markup of the list, but will at least set the right intial state when reloading the submission page or when used in MBI actions.

You would for eg. define the following "description" for an element displaying a list of languages:

<select name="DEMOART_LANG">
        <option>Select:</option>
        <option value="eng">English</option>
        <option value="fre">French</option>
        <option value="ger">German</option>
        <option value="dut">Dutch</option>
</select>

In the above example a file named "DEMOART_LANG" will be created with the user chosen value (for eg. "ger") in the submission directory.

Note that if you set the element as being "mandatory" on your page, the initial "Select:" value must be the first option of your list (you can otherwise let specify the element as optional, and remove this item if wanted).

3.3 Creating a new check

When adding an existing element to your submission page you can associate a Javacript check to the element. You can choose from the existing one or define your own check from the Available Checks menu of the WebSubmit admin interface.

From the "Available Checks" page, select "Add check", give it a name and a "description": the description corresponds to the Javascript code to be executed to validate the form before submitting it. In this description you should define a Javascript function named after your check, that takes a string (the value to validate) as input. The function must then return 0 if the check fails (the form cannot be submitted) or 1 if the check passes. In addition you may want to raise an alert notifying the user about the error.

For eg. to check if the given number of a field is smaller than 10, we create a "check" named Smaller_Ten:

def Smaller_Ten(txt) {
    /* Check if input is strictly smaller than 10 */

    if (parseInt(txt) < 10 && parseInt(txt).toString()==txt) {
        // Note that parseInt('9a') returns 9, hence the '.toString()==txt' test.
        return 1;
    } else {
        alert("The given number is not smaller than 10! Please fix it.");
        return 0;
    }
}

4. WebSubmit Functions

This section focuses on how to create new WebSubmit functions and use existing ones. To learn more about the concept of WebSubmit functions, read the Overview section of this guide.

4.1 Existing functions

The list of existing functions can be found in the "available functions" section of the WebSubmit admin interface. Click on "Edit Details" links to read more about the functions.

You add existing functions in the functions list of each action (SBI, MBI, etc.) of your submission in order to post-process user-submitted values and build your customized workflow. Some functions have some prerequisites on the order they are run, and the functions that must precede them. For eg. many functions expect the "Get_Recid" function to run before them. You can check the workflows provided with the Atlantis Demo installation

4.2 Creating a new function

This section describes the creation of a customized function. It does not show how to add an already existing function to your submission. Refer to the Tutorial to learn how to add an existing function to your submission.

A WebSubmit function corresponds to a Python file, which must be named after the function name (eg "My_Function" => "My_Function.py") and placed into the /opt/invenio/lib/python/invenio/websubmit_functions/ directory. The file must also contain a Python function with the same "My_Function" name. This function interface must be the following one:

def My_Function(parameters, curdir, form, user_info=None):
where The values returned by the function are printed on the last submission page.

For the function to be available from the WebSubmit admin interface, it must be specifically inserted from the admin interface. Scroll down to the bottom of the list, and press "Add New Function". Insert the function name, as well as all the wished parameters for the function.

5. File Management with WebSubmit

This chapters introduces different strategies to enable file upload in WebSubmit submissions. You should already have a good understanding of how WebSubmit works before reading further. Some practice in WebSubmit submission implementation is also highly recommended in order to understand the techniques introduced below. To some extent, you might want to come back to this chapter only once you have already set up your submission, and are about to implement file support, as the documentation below is sometimes describing detailed implementation steps.

Several techniques exists to handle files, to accommodate to various use cases. Just read further below to choose the most appropriate technique based on your needs.

5.1 File Input + FFT Technique

The most "basic" way of letting your users submit files is to add a File Input element to your submission page(s), one for each possible file to upload, in the same way as you add other input fields.
This technique is useful if you need to handle a well known number of files.

Limitations: Procedure:

1) You can reuse an already existing File Input element, or create your own. If you want to reuse an existing one, jump straight to point 3 below. Otherwise, head to the WebSubmit admin interface, select "6. Available Elements" in the menu, scroll down the opening page and hit "Add New Element" button.

2) Choose a name for your new element (For e.g. "DEMO_FILE"). Select the "File Input" item of the "Element Type" menu. Once done, click on the "Save Detais" button.

3) Go to the main WebSubmit admin interface and select the submission you want to edit (for e.g. "DEMOART"), then action (for e.g. "SBI"), then the page. Scroll to the bottom of the page, and click on the "Add a Field" button.

4) From the "Field Name" menu, select the desired input file element (for e.g. "DEMO_FILE", if you have created it in previous steps). Fill in the other usual fields, and click "Add Field". Reorder the elements on the page as needed.

At this step your users will be able to upload a file to the server during the submission process. Indeed if you have a look at the corresponding submission directory in /opt/invenio/var/data/submit/storage/ you will see the uploaded file in the /files/DEMO_FILE/ directory, plus a standard DEMO_FILE file containing the path to the uploaded file. However the file is not attached to the uploaded record: you must add a corresponding entry in the BibConvert template, in a similar fashion as you would with other input fields.

5) Open your BibConvert "target" template used by the "Make_Record" or "Make_Modify_Record" in your preferred editor. If you know where to find your BibConvert templates, jump to point 6. Otherwise continue reading: the BibConvert templates are used by the "Make_Record" and "Make_Modify_Record" to create a MARCXML according to some specific rules. From your submission page, click on "view functions" of the action you want to edit, then "view parameters" of the Make_Record/Make_Modify_Record function. The "create/modifyTemplate" and "sourceTemplate" are the names of the BibConvert templates you can find in the /opt/invenio/etc/bibconvert/config/ directory (Depending on the authorization on disk, you might even be able to edit the files from the web interface). Read more about BibConvert in the BibConvert admin guide.

6) Add an FFT tag to your target BibConvert template. FFT is a special tag interpreted by BibUpload in order to handle files. You will find an example below, but you can read more about the FFT syntax in the BibUpload admin guide

FFT::REPL(EOL,)---<datafield tag="FFT" ind1=" " ind2=" "><subfield code="a"><:curdir::curdir:>/files/DEMO_FILE/<:DEMO_FILE::DEMO_FILE:></subfield><subfield code="n">My File</subfield><subfield code="t">Main</subfield></datafield>

The sample line above will rename the uploaded record to "My File", and then attach it to the record (once the created MARCXML will be BibUploaded). Note that you could keep the original name, or name the file after the report number, specify a doctype such as "Main", or "additional", include a comment specified in another field, etc. Simply modify the FFT tag according to your needs. Note however that this technique will allow to revise the file only if you can identify it later by a well defined name. The above line is also uploading the file in the category, or doctype "Main"

7) One last thing not to forget is to add DEMO_FILE to the source BibConvert template, as you would for any other WebSubmit element. Open the source BibConvert template (which is also given as parameter to the Make_Record/Make_Modify_Record functions, and can be found in the /opt/invenio/etc/bibconvert/config/ directory), and add for example:

DEMO_FILE---<:DEMO_FILE:>

Repeat this procedure to add additional input file fields. It is perfectly ok to have several FFT field instances in the templates.

Note that if one of the file input fields is left empty by the user, no file is uploaded, no DEMO_FILE file is created in the submission directory, but an erroneous FFT line is still inserted in the created output. It is why you might want to make all the File Input fields mandatory, or use the BibConvert MINLW(..) function to ensure that the field is created only if the output line is at least a given number of characters (to be computed based on the default length of an empty line). This shows that this technique reaches its limits quite quickly in terms of flexibility.

Revising/deleting files

To revise files you would create a BibConvert template with the adequate FFT tag. We assume below that you set up the modification interface by using the Create_Modify_Interface function/technique, so that we can reuse the submission page set up for the "SBI" action. The key point is that the Input File element name is well known ("DEMO_FILE" in our case).

1) Open your BibConvert "target" template used by the "Make_Modify_Record" function. Note that it should not be the same one as used in the "SBI" action of your submission, as it must create different outputs.

2) Add an FFT tag to revise your file:

        <datafield tag="FFT" ind1=" " ind2=" ">
            <subfield code="a"><:curdir::curdir:>/files/DEMO_FILE/<:DEMO_FILE::DEMO_FILE:></subfield>
	    <subfield code="n">My File</subfield>
	    <subfield code="d">KEEP-OLD-VALUE</subfield>
	    <subfield code="z">KEEP-OLD-VALUE</subfield>
	    <subfield code="r">KEEP-OLD-VALUE</subfield>
        </datafield>

3) The above FFT will be bibuploaded in --correct mode, hence revising the file named "My File" with the new one. Note in this example the use of the special keyword KEEP-OLD-VALUE to keep the previous comment, description or restriction applied to the file, if any (so that comment is not lost for e.g. if you don't ask a new one).

You will notice the following limitation: you must be able to map the uploaded file to the target file to revise by its name. This means that you should be able to initially control your filename(s), for e.g. by having it fixed ("Main", "additional", "figure", etc) or guessable, for e.g. using the report number (<:DEMOART_RN::DEMOART_RN:>-main, <:DEMOART_RN::DEMOART_RN:>-additional).

To circumvent this limitation (as well as the impossibility to delete files), you might combine this technique with one of the techniques described below (For eg: with the Move_Revised_Files_To_Storage function detailed in the Revising/deleting files section of the File Input element + Move_Files_To_Storage function technique)

5.2 File Input element + Move_Files_To_Storage function

This way of doing is similar to the technique described above. The main difference is that it leaves the job of actually uploading/revisings the file(s) to a WebSubmit functions, instead of the FFT in the uploaded MARCXML.

Limitations:

1-4) Add a file input field to your submission page as describe in previous technique.

As before, the file is uploaded to the server once the user ends the submission, but it is not attached to the created record. The solution is to rely on the "Move_Files_To_Storage" function:

5) Add the "Move_Files_To_Storage" function to your submission functions. It is suggested to insert it after the function "Insert_Record".

6) Configure the Move_Files_To_Storage function. The key parameter is paths_and_suffixes, which must contain your File Input element names, and possibly map to some suffixes to be added to the corresponding uploaded files.
For example, add {'DEMO_FILE':'', 'DEMO_FILE2':'_additional'} to have the files uploaded with DEMO_FILE and DEMO_FILE2 elements attached to the record (with the DEMO_FILE2 filename suffixed with "_additional"). The paths_and_restriction works similarly to set the files restrictions.

Each file is simply attached to the record, with its document type (doctype) being the name of your input file element (for e.g. file uploaded with the "DEMO_FILE" element is attached with document type "DEMO_FILE"). The filenames are kept.

Revising/deleting files

The "Move_Revised_Files_To_Storage" must be added to your modification workflow ("MBI"). It will use the file uploaded with your "DEMO_FILE" input element to revise the file with doctype "DEMO_FILE", the file from "DEMO_FILE2" input element to revise file with doctype "DEMO_FILE2", etc.

1) Go to your modification workflow (MBI), and add Move_Revised_Files_To_Storage to your submission functions (usually after the "Insert_Modify_Record").

2) Set up the elementNameToDoctype parameter of this function so it maps your File Input field name to the doctype to revise. For eg: "DEMO_FILE=Main" so that file uploaded using the DEMO_FILE input field will be used to replace the file with doctype "Main". This makes the assumption that you indeed previously uploaded (for eg. with an FFT during an SBI step) a file with this doctype.
You can define several mappings, by using character | as separator. For eg: DEMO_FILE=Main|DEMO_FILE2=Additional.
If you have initially uploaded your files with the Move_Files_To_Storage function, you will for eg. configure the parameter with "DEMO_FILE=DEMO_FILE", so that file uploaded with DEMO_FILE input field will replace the files that have been previously uploaded with doctype "DEMO_FILE".

Note that function Move_Revised_Files_To_Storage can be used in combination with other techniques, as long as the mapping in elementNameToDoctype can be done unambiguously.

Check the Move_Revised_Files_To_Storage function documentation for more detailed information.

5.3 Create_Upload_Files_Interface + Move_Uploaded_Files_To_Storage functions

This option offers a full-featured file manager, that can be easily configured to support file upload, revision, deletion, commenting, restrictions, etc. It can handle an "unlimited" number of files.

The strategy consists in adding a WebSubmit function ("Create_Upload_Files_Interface") to your submission functions list, in order to display a file submission interface. The interface will therefore only show up after all the submission pages have been filled in and submitted. Once displayed, the interface lets the user upload new/revised files: the function refreshes the interface for each upload (runs through the functions list again and stops on the Create_Upload_Files_Interface). When the user applies the modifications, the submission "step" is incremented and executes the submissions function of step 2, skipping the display of the interface. In this step 2 you can perform the usual tasks of your submission. You also must add an additional function (Move_Uploaded_Files_To_Storage) to run at step 2 in order to attach the files that have been submitted at step 1.

These functions are incompatible with function "Create_Modify_Interface". It is therefore suggested to create a dedicated submission action (in addition to "SBI" and "MBI") to let your users edit the files independently of the bibliographic data. An example of such setup can be found in DEMOPIC submission.

Limitations:

1) Go to your submission in WebSubmit admin, and add a new submission action (for e.g. "[SRV] Submit New File"). If necessary, create your own action in WebSubmit admin "Available WebSubmit Actions" page. You can clone from another existing action (in that case move to point 4 below), or simply create an empty action.

2) Go to the new SRV action interface ("View Interface"), add a page, open it and add fields that will allow users to specify the record to update. Typically you will add a "DEMO_RN" field to enter the report number, and "DEMO_CONTINUE" button to submit the form.

3) Go the the new SRV action functions ("View" functions) and add the necessary functions: for e.g. at step 1, "Get_Report_Number", "Get_Recid" and "Create_Upload_Files_Interface". At step 2, "Get_Recid", "Move_Uploaded_Files_to_Storage" and "Print_Success".

4) Configure the Create_Upload_Files_Interface parameters. There are many options available. Briefly, the most important one is the "doctype" parameter, which lets you specify the document types users are allowed to submit. Use "|" to separate doctypes, and "=" to separate doctype and doctype description. For e.g. input "Main=Main File|Additional=Additional Document" to let users choose either Main or Additional types (which will show as "Main File" and "Additional Document" to users). Other parameters will let you define for which doctype users can revise or delete files (for e.g. specify for canDeleteDoctypes "Additional" so that only these documents can be deleted once they have been uploaded). Use "*" to specify "any declared doctype", and "|" as separator (for all can_*_doctypes parameters).

To read more about the parameters available for this function, check the Create_Upload_Files_Interface function documentation.

5) Configure the Move_Uploaded_Files_To_Storage. There are less options than in Create_Upload_Files_Interface function. Specify for e.g. in createIconDoctypes for which doctypes icons will be created, or in "forceFileRevision" if revisions of file attributes trigger a new file revision. For an up-to-date documentation check the Move_Uploaded_Files_to_Storage function documentation.

Revising/deleting files

File revisions and deletions comes for free with the functions. Simply allow deletion or revision of files when configuring Create_Upload_Files_Interface.

5.4 Upload_File element instance + Move_Uploaded_Files_To_Storage function

This is similar to option 3, except that instead of using a WebSubmit function to build the interface, you use a regular WebSubmit response element. The advantage is that you can plug the WebSubmit element wherever you want on your submission page.

Limitations:

To set up a file upload interface using this technique:

1) Go to your submission page, and add an element: choose the "Upload_Files" response element. But wait! Read further before:

2) You most probably want to customize the upload interface (set which types of files can be uploaded, how many, etc.). To do so, you would have to edit the code of the Upload_Files response element and change the parameters of the "create_file_upload_interface(..)" function. However this would affect all submissions using this element. The solution is to "clone" this element (by creating a new element: "Available elements"-> scroll down -> "Add New Element". Choose for e.g. name "DEMO_UploadFiles", Element Type-> "Response" and paste the code of the Upload_Files element in the "Element Description" field). Once done, add the "DEMO_UploadFiles" element to your page.

3) Go to your submission functions. Add the Move_Uploaded_Files_to_Storage function, and configure it in the same way as it would be done with the option 3, step 5.

Revising/deleting files

File revisions and deletions comes for free with the this technique. Simply allow deletion or revision of files when configuring Upload_Files element of the MBI or SRV steps.

5.5 FCKeditor element instance + Move_FCKeditor_Files_To_Storage function

This technique relies on the popular HTML rich text editor "FCKeditor", which embeds an interface to upload files. As a consequence it only makes sense to use this technique in the cases where you want files to be uploaded as part of some HTML context. Typical use cases are submissions for the WebJournal module, for which you want to upload articles. The DEMOJRN submission is an example of submission using this technique.

Limitations:

Setting up a submission to use the FCKeditor is really similar to the strategy described in option 4: the principle is to instantiate a custom "Response Element" that will call a function taking care of the interface, and then plug a WebSubmit function to take care of attaching the files.

1) Go to your submission page, and add an element: choose the "DEMOJRN_ABSE" response element. But wait! Read further before:

2) You will want and need to customize the behaviour of the FCKeditor, but you don't want to alter the behaviour of other submissions using this element. The solution is to "clone" this element: create a new element: "Available elements"-> scroll down -> "Add New Element". Choose for e.g. name "DEMO_FCKEDITOR", Element Type-> "Response" and paste the code of the DEMOJRN_ABSE element in the "Element Description" field). Customize the element according to your needs. This will need some development skills and good overview of your metadata and submission in order to have the editor correctly initialized. Additional information can be found in the FCKeditor Integration guide.

3) Once done, add the "DEMO_FCKEDITOR" element to your page.

4) Go to your submission functions. Add the Move_FCKeditor_Files_To_Storage function, and configure it so that the input_fields parameter list the name(s) (separated by comma if several instances) given to the FCKeditor instance(s) created in by the DEMO_FCKEDITOR response element.

Revising/deleting files

The way this editor is currently used does not let you delete/revise file right from the editor interface. To set up file deletion/revision, combine this technique with option 3 for example.

5.6 Upload_Photo_interface element instance + Move_Photos_To_Storage function

This interface is specifically dedicated to pictures: it enables the selection of bunch of photos to upload, and let you preview and comment them before submitting the record.

Limitations:

Setting up a submission to use this interface is really similar to the strategy described in option 4: the principle is to instantiate a custom "Response Element" that will call a function taking care of the interface, and then plug a WebSubmit function to take care of attaching the files.

1) Go to your submission page, and add an element: choose the "Upload_Photos" response element. But wait! Read further before:

2)As in other strategies that use a response element to layout the interface, you might want to customize the behaviour of the photos uploader, but you don't want to alter the behaviour of other submissions using this element. If so (though it is not needed in the case of this interface), the solution is to "clone" this element: create a new element: "Available elements"-> scroll down -> "Add New Element". Choose for e.g. name "DEMO_UPLOADPHOTO", Element Type-> "Response" and paste the code of the Upload_Photos element in the "Element Description" field). Customize the element according to your needs. This will need some development skills in order to have the interface correctly customized..

3) Once done, add the "DEMO_UPLOADPHOTO" (or Upload_Photos if you kept the original file) element to your page.

4) Go to your submission functions. Add the Move_Photos_To_Storage function, and configure it according to your needs.

Revising/deleting files

The interface lets user add or remove files, but cannot specifically revise a file. If needed, it can be combined with another strategy such as option 3.

5.7 Alternatives: BibDocFile CLI or BibDocFile Web Interface

These last techniques are not meant to be used in WebSubmit submissions, but are admin tools that can be used to manage files, independently of any submission. They are described here for the sake of completness.

The BibDocFile command line interface is describe in more details in How to manage your fulltext files through BibDocFile.

The BibDocFile admin interface gives access to some of the functionalities offered by its command-line equivalent through a graphical web interface. Its interface is similar to the one offered by the Upload_File element or the Create_Upload_Files_Interface function, but is not tied to a specific submission (and therefore won't automatically execute post-processing steps such a stamping).
Access to the BibDocFile admin interface is restricted via the WebAccess runbibdocfile action.

6. Access restrictions

This section focuses on restricting the access to the submission themselves, not to produce content (records, files, etc.) which are restricted. Refer to the adequate document to restrict the collections or files.

6.1 Admin-level

Access to the WebSubmit admin interface is controlled via the WebAccess cfgwebsubmit action.

6.2 User-level

Access to the submissions is controlled via the WebAccess submit action. The action has the following parameters:

Connect for eg. a role to the submit action with parameters doctype=DEMOART, act=SBI, categ=* to let people of this role submit new documents in the DEMOART submission, in any category.

If you do not add an authorization for a given submission doctype and action (even an empty role), the submission is open to anybody. For eg. in the above example, provided that an MBI action exists, even with a restricted SBI action anybody will be able to modify existing documents with MBI unless the MBI action is also connected to a role. To make it short: a submission it not restricted until it is...

Note that it is your responsibility as WebSubmit admin to ensure that your workflow is not modifying records outside the desired scope. Given that records are independant of the submission that created them, there is no mechanism in the WebSubmit engine that prevents the DEMOART submission to modify records created with the DEMOBOOK submission. A check must be added at the level of WebSubmit functions of your submission to make sure that chosen submission and category well match the record to be modified (for eg. retrieved via the Get_Report_Number function)

.

All the above checks also do not prevent any authorized user to modify documents submitted by others. To enable finer-grained restrictions, use the WebSubmit function "Is_Original_Submitter" or "User_is_Record_Owner_or_Curator" in your MBI, SRV, etc. submission workflow (for eg. just after the "Get_Recid" function). Check also the Restricting the submission how-to from this guide.

7. Linking to submissions

7.1 Adding a link from the submissions page

Please refer to the tutorial (section 2.1.7) to learn how to populate the list of submissions on the main submission page (at https://cds.cern.ch/submit/).

7.2 Linking to a submission with direct URL (in email, formats, etc.)

It might be necessary to construct URL that lead to the submission, for eg. when sending emails, or when displaying some actions from the Detailed record view (formats).

7.2.1 URL to main submission page

A url to the main page of a submission can be built with this pattern:

https://cds.cern.ch/submit?doctype=DEMOART

where DEMOART would be your submission code.

7.2.2 URL to jump straight into the submission

One can directly move into the submission by building such a URL:

https://cds.cern.ch/submit/direct?sub={action}(submission_code)

For eg: https://cds.cern.ch/submit/direct?sub=MBIDEMOART

In that way one would skip the submission "splash" page (Page "0") and jump straight to the submission page 1. For an action that must deal with a specific record (eg. MBI, APP) one can already pre-fill for eg. the "report number" field:

https://cds.cern.ch/submit/direct?sub=MBIDEMOART&DEMOART_RN=TESLA-FEL-99-07

Depending on the way your submission is built, you might have also to specify the category of the document to modify (the category is usually chosen on page "0" of the submission):

https://cds.cern.ch/submit/direct?sub=MBIDEMOART&DEMOART_RN=TESLA-FEL-99-07&comboDEMOART=Article

(Note how the category field is constructed: combo{submission_code} )

You can add as many parameters as needed to ensure that the form is filled with adequate values before being presented to the user. The parameters names correspond to the fields names in WebSubmit. For eg:

https://cds.cern.ch/submit/direct?sub=MBIDEMOART&DEMOART_RN=TESLA-FEL-99-07&comboDEMOART=Article&DEMOART_CHANGE=DEMOART_TITLE

The parameters that you have to specify will depend on the usage which is made of them on the submission side.

For fields that can take several values as input (for eg. selection lists, as in the DEMOART_CHANGE example above) and that translate into a file in the submission direction with one value per line, you would have to specify all the values in the same URL argument, separated by "%0A" (newline "\n" encoded for URL):

https://cds.cern.ch/submit/direct?sub=MBIDEMOART&DEMOART_RN=TESLA-FEL-99-07&comboDEMOART=Article&DEMOART_CHANGE=DEMOART_TITLE%0ADEMOART_ABS

Depending on how your submission is build, you can also move to another page ("curpage" param) or another step of the workflow("step" param):

https://cds.cern.ch/submit/direct?sub=MBIDEMOART&DEMOART_RN=TESLA-FEL-99-07&comboDEMOART=Article&DEMOART_CHANGE=DEMOART_TITLE&step=1

(In the above example a logged in user would skip the submission splash page AND the modificaton interface to select the document and fields to update, to jump directly to the DEMOART_TITLE modification field)

In such cases you have to make sure that you provide all the information requested by the submission at each of the steps/pages until the provided step/page. Depending on how your submission is built it might be simply not possible to do that. This would be especially true when advancing steps, as functions netween the steps would not be run — most probably advancing directly to step 1 will be a maximum one can easily support — while controlling "curpage" parameter might be easier.

8. Terminology

8.1 The document type of a file (doctype)

The document type is an attribute of a file. It can be seen as a category which lets you organize your files: "Main" file, "Additional", "Figures", "source", whatever you need. It is not so much used excepted on record/XXX/files/ pages to group files by category. It can however come handy during file upload processes, to assign different kinds of restrictions based on the document type, or simply to make the configuration of the submission easier, depending on which technique you use to manage files.

8.2 The submission directory (curdir)

The WebSubmit workflow mainly splits in two parts: data gathering (user interface side, with WebSubmit pages and elements) and data integration part as a second step (with WebSubmit functions involved, plus BibConvert templates). In the middle stands the submission directory (also called "curdir"). Each submission session corresponds to a unique submission directory, which stores the values collected from the submission pages, in the form of a series of textual files, one for each input field. These files are named after the submission WebSubmit elements, and their content is the value input by the submitter. Note that uploaded files are stored in a /files/ subdirectory.

WebSubmit functions process the files in this directory. For example "Make_Record" which creates the MARCXML (through BibConvert templates), or the Stamp_Uploaded_Files, which will stamp the uploaded files in the /files/ directory. If you happen to write a customized WebSubmit response element that writes files to disk, or implement a WebSubmit function that must retrieve submitted values, you will certainly use the submission directory.

These submission directories are also helpful to debug submissions, and can act as a backup when something goes wrong during a submission.

An example of submission directory could be found at this path /opt/invenio/var/data/submit/storage/running/DEMOART/1245135338_62620, where DEMOART is your submission code, and 1245135338_62620 is the submission session ID, as found at the bottom of each WebSubmit web page during the submission process. Just after the user has finished the submission, this directory would contain all the collected values of the form. But the life of the submission directory does not stop there. Immediately after the user completed the submission, the WebSubmit functions are executed: for e.g. (depending on how you have configured your submission) creation of a report number (stored in the submission directory too!) (Function Report_Number_Generation), creation of the MARCXML (usually named "recmysql", in the submission directory again!) (Function Make_Record), upload of the MARCXML (Function Insert_Record) and Move_To_Done. This last function moves the submission directory to a new place. It could be for e.g.: /opt/invenio/var/data/submit/storage/done/DEMOART/DEMO-ARTICLE-2010-001.tar.gz, supposedly that the report number of the submitted record is ARTICLE-2010-001. Some other functions will move the submission directory to other places, and some functions will even let you configure where to move it.

9. Load/dump Submissions

Use websubmitadmin to dump a given submission configuration from the database to a file. For example:

$ /opt/invenio/bin/websubmitadmin --dump=DEMOART > DEMOART_db_dump.sql

The submission dumper tool relies on the fact that submission-specific elements and functions are prefixed with the submission doctype (for example DEMOART), and will only dump those. Functions, elements, etc. without prefix are considered "shared", and not dumped by default, in order to eliminate duplicates). See also option --method to change that behaviour.

websubmitadmin can also help you "diff" between different submission versions (for eg. between a dump file and the database). This tool will optionally hide differences solely due to ordering of statements in the dump, or different modification dates. For example:

$ /opt/invenio/bin/websubmitadmin --diff=DEMOART --ignore=d,o < DEMOART_db_dump.sql

Run /opt/invenio/bin/websubmitadmin --help for more info and more examples.

Use dbexec to load a submission dumped with websubmitadmin. For example:

$ /opt/invenio/bin/dbexec < DEMOART_db_dump.sql

- End of new WebSubmit admin guide -

WARNING: OLD WEBSUBMIT ADMIN GUIDE FOLLOWS
This WebSubmit Admin Guide was written for the previous PHP-based version of the admin tool. The submission concepts and pipeline description remain valid, but the interface snapshot examples would now differ. The guide is to be updated soon.

Table of Contents

 

 

General Overview of the Manager Tool

Things to know before using the Manager:

     This manager tool allows you to administrate all the WebSubmit interface. With it, you will be able to create new actions, new types of documents and edit the existing ones.

     The main objects in webSubmit are the "action" (such as "Submit New Record", "Submit New File", "Modify Record"...) and the "type of document" (such as "preprint", "photo"...).

     To one given type of document can be attached several actions. An action is the addition of two processes:
    • The first one is the data gathering. The manager will allow you to create new web forms corresponding to the fields the user will have to fill in when using webSubmit.
    • The second one is the data treatement. Basically, what the program will do with the data gathered during the first phase. The treatment appears in this tool as a sequence of functions. This manager will allow you to add functions to an action, edit the existing functions, and reorder the functions.

See also:

  • using the manager through an example
  • interface description
  • actions
  • document types
  •  

     

    Using the manager through an example

    what is this?

      This page presents you the typical situations a user could meet using WebSubmit, and for each situation how to use the manager to configure it.

    The user reaches WebSubmit main page.

    Main Page  To add a document type to WebSubmit, you should go to the main page and click on "New Doctype" in the left blue panel.

     Even once created, a document type will not appear automatically on this page. To configure the list of catalogues and document types displayed on this page, the administrator shall go to the edit catalogues page. (see the guide section)

    The user can then click on the document type he is interested in.

    Document type Page  The text appearing under the header containing the name of the document can be configured by going to the main page, click on the title of the document type then on the "Edit Document Types Details" button.

     You can associate several categories to a document type which can be defined by going to the main page, click on the title of the document type then on the "View Categories" button. The selected category will be saved in a file named "comboXXX" (where XXX is the short name of the document type) in the submission directory.

     To add an action button to this page, first implement this action by going to the main page, click on the title of the document type then on the "Add a new submission" button. If the action is already implemented and the button still does not appear on the submision page, then you should edit the details of this implementation: go to the main page, click on the title of the document type then on the icon in the "Edit Submission" column and in the line of the desired action. There you should set the "Displayed" form field to "YES".

     You can also change the order of the buttons, by going to the main page, click on the title of the document type then on the icon in the "Edit Submission" column and in the line of the desired action. There you can set the "buttonorder" form field.

    The user now may choose a category, then click on the action button he wishes.
    The submission starts, the first page of the web form appears.

    Document type Page  This web form is composed of several pages, on each of these pages form fields can be found. To modify the number of pages, add or withdraw form fields and modify the texts before each form field, you shall go to the main page, click on the title of the document type then on the icon in the "Edit Submission Pages" column and in the line of the desired action. (see the guide section)

    On the last page of the submission, there should be a button like in the following image which will trigger the end script

    Document type End Page  This button is defined like any other form field. Its definition should include a onclick="finish();" javascript attribute.

     After clicking this button, WebSubmit will apply the end script functions to the gathered data. To modify the end script, you shall go to the main page, click on the title of the document type then on the icon in the "Edit Functions" column and in the line of the desired action. (see the guide section)

    See also:

    interface description
    actions
    document types

     

     

    Philosophy behind the document submission system

    This page will explain some philosophical issues behind the document submission system.

    On the relation between a search collection and a submission doctype:

       The relation between a search collection and a submission document type may be prone to certain confusion for Invenio administrators. This comes from the fact that there is no one-to-one direct mapping between them, as is usual elsewhere. The relation is more flexible than that.

       A search collection in Invenio is defined through a search query. For example, "all records where field F contains the value V belong to collection C". Several assertions can be deduced from this definition:
       1/ A single record can appear in several collections.
       2/ There is no limitation to the number of collections in which a record can appear.
       3/ Any query can be used to build a collection. The query can also be a complex one using logical operators, hence can rely on the value of several fields.

       (In addition, a search collection can be defined via a set of its subcollections in the hierarchy tree. Refer to the WebSearch Admin Guide for that matter.)

       The submission system basically creates an XML MARC record and stores it in the database. To which collection this new record belongs depends exclusively on the content of the XML MARC record. This XML MARC record is created by the Make_Record function. So the secret of the matching of a submitted record to a particular collection lies in the configuration of this function. Some examples will clarify this point:

       Example 1: Let's consider a "Preprints" collection which is defined by this query: "980__a:PREPRINT". We want to create a submission document type from which all records will go to this "Preprints" collection. For this, the Make_Record function should be configured so that a 980__a field containing "PREPRINT" will always be created.
       Example 2: Let's still consider the same "Preprints" collection, and an additional "Theses" collection based on a slightly different query "980__a:THESIS". We want to create a single submission type from which the records will go in the "Preprints" or "Theses" collections depending on a field chosen by the submitter. In this case, the Make_Record function should be configured so that a 980__a field will contain either "PREPRINT" or "THESIS" depending on the value entered by the submitter.

       The apparent disconnection between a submission document type and a search collection allows a great flexibility, allowing administrators to create 1 to 1, 1 to n, n to 1 or even 1 to 0 (not very useful!) relations.

     

     

    Interface Description

    Welcome to webSubmit Management tool:

       on the websubmit admin main page you will find:



      • The list of all existing document type in the middle of the page. Click on one line in the list to have access to the main document modification panel
      • The right menu panel with the following links inside:
        • "webSubmit Admin": This links leads you back to the main page of the manager.
        • "New Doctype": Click here if you wish to create a new document type.
        • "Remove Doctype": Click here if you want to remove an existing document type.
        • "Available Actions": Lists all existing actions
        • "Available Javascript Checks": Lists all existing Javascript checking functions.
        • "Available Element Description": Lists all existing html form element descriptions.
        • "Available Functions": Lists all existing functions in CDS Submit.
        • "Organise Main Page": Allows you to manage the appearance and order of the list of document types on CDS Submit User main page.

    See also:

    interface description
    actions
    document types

     

     

    Document Types

       WebSubmit can propose several actions on different document types. Each of these document type may or may not implement all possible actions. The main difference between each document type is the metadata which define each of them, and may also be the kind of fulltext files attached to one record.

       A document type can be one of "Thesis", "Photos", "Videotapes"... or whatever type of document you may invent. A document type is always defined by its metadata. It may or may not have a fulltext file attached to it.

       This tool leaves you free to create the web forms adapted to whatever type of document you want to create (see "Create and Maintain the Web Form") as well as free to determine what treatment you wish to apply to the collected data (see "Create and Maintain the Data Treatment").

    See also:

    add a new type of document
    remove a type of document
    modify a type of document
    implement an action over a type of document

     

     

    Ading new type of document

    How to get there?

     Click on the "New Doctype" link in the webSubmit right menu.

    How to do this?

     A new document type is defined by 6 fields:
    • Creation Date and Modification Dates are generated and modified automatically.
    • Document Type ID: This is the acronym for your new document type. We usually use a 3 letters acronym.
    • Document Type Name: This is the full name of your new document. This is the text which will appear on the list of available documents and catalogues on webSubmit main page.
    • Document Type Description: This is the text which will appear on the document type submission page. This can be pure text or html.
    • Doctype to clone: Here you can choose to create your document type as a clone of another existing document type. If so, the new document type will implement all actions implemented by the chosen one. The web forms will be the same, and the functions also, as well as the values of the parameters for these functions. Of course once cloned, you will be able to modify the implemented actions.

    See also:

  • remove a type of document
  • modify a type of document
  • implement an action over a type of document
  •  

     

    Removing a Document Type

    How to get there?

     Click on the "Remove Doctype" link in the webSubmit admin right menu

    How to do this?

     Select the document type to delete then click on the "Remove Doctype" button. Remember by doing this, you will delete this document type as well as all the implementation of actions for this document type!

    See also:

  • create a type of document
  • modify a type of document
  • implement an action over a type of document
  •  

     

    Modifying a Document Type

    What is it?

     Modifying a document type in webSubmit - this will modify its general data description, not the implementations of the actions on this document type. For the later, please see implement an action over a type of document.

    How to get there?

     From the main page of the manager, click on the title of the document type you want to modify, then click on the "Edit Document Type Details".

    How to do this?

     Once here, you can modify 2 fields:
  • Document Type Name: This is the full name of your new document. This is the text which will appear on the list of available documents and catalogues on webSubmit main page.
  • Document Type Description: This is the text which will appear on the right of the screen when the user moves the mouse over the document type title and on the document type submission page. This can be pure text or html.
  • See also:

  • remove a type of document
  • create a type of document
  • implement an action over a type of document
  •  

     

    Actions

     In webSubmit you can create several actions (for example "Submit New Record", "Submit a New File", "Send to a Distribution List", etc. in fact any action you can imagine to perform on a document stored in your database). The creation of an action is very simple and consists in filling in a name, description and associating a directory to this action. The directory parameter indicates where the collected data will be stored when the action is carried on.

     Once an action is created, you have to implement it over a document type. Implementing an action means defining the web form which will be displayed to a user, and defining the treatment (set of functions) applied to the data which have been gathered. The implementation of the same action over two document types can be very different. The fields in the web form can be different as well as the functions applied at the end of this action.

    See also:

  • create a new action
  • remove an action
  • modify an action
  • implement an action over a type of document
  •  

     

    Adding a New Action

    How to get there?

     Click on the "Available Actions" link in the websubmit right menu, then on the "Add an Action" button.

    How to do this?

     A new action is defined by 6 fields:

    • Creation Date and Modification Dates are generated and modified automatically.
    • Action Code: This is the acronym for your new action. We usually use a 3 letters acronym.
    • Action Description: This is a short description of the new action.
    • dir: This is the name of the directory in which the submission data will be stored temporarily. If the dir value is "running" as for the "Submit New Record" action (SBI), then the submission data for a Text Document (document acronym "TEXT") will be stored in the /opt/invenio/var/data/submit/storage/running/TEXT/9089760_90540 directory (where 9089760_90540 is what we call the submission number. It is a string automatically generated at the beginning of each submission). Once finished, the submission data will be moved to the /opt/invenio/var/data/submit/storage/done/running/TEXT/ directory by the "Move_to_Done" function.
    • statustext: text displayed in the status bar of the browser when the user moves his mouse upon the action button.

    See also:

  • remove an action
  • modify an action
  • implement an action over a type of document
  •  

     

    Removing an Action

    What is it?

     Removing the implementation of an action over a document type - Please note the removal of the action itself is not allowed with this tool.

    How to get there?

     From the websubmit admin main page, click on the title of the relevant document type. Then click on the red cross corresponding to the line of the action you want to remove.

    See also:

  • create an action
  • modify an action
  • implement an action over a type of document
  •  

     

    Modifying an Action

    What is it?

     This page is about how to modify the general data about an action - for modifying the implementation of an action over a document type, see implement an action over a type of document

    How to get there?

     Click on the "View Actions" link in the right menu of the websubmit admin, then on the title of the action you want to modify...

    How to do this?

     You may modify 3 fields:
    • Action Description: This is a short description of the new action.
    • dir: This is the name of the directory in which the submission data will be stored temporarily. See the meaning of this parameter in create an action.
    • statustext: text displayed in the status bar of the browser when the user moves his mouse upon the action button.

    See also:

  • remove an action
  • create an action
  • implement an action over a type of document
  •  

     

    Implement an action over a document type

    What is it?

     Implement an action over a document type. Create the web forms and the treatment process.

    How to get there?

     From the main page of the manager, click on the title of the relevant document type.
    Then click on the "Add a New Submission" button.

    How to do this?

     Just select the name of the action you want to implement. When you select an action, the list of document which already implement this action appears. Then you can select from this list the document from which you want to clone the implementation, or just choose "No Clone" if you want to build this implementation from scratch.

     After selecting the correct fields, click on the "Add Submission" button.

     You then go back to the document type manager page where you can see that in the bottom array your newly implemented action appears (check the acronym in the first column).



    • Clicking on the action acronym will allow you to modify the general data about the action (remember in this case that all the other implementations of this particular action will also be changed).
    • The second column indicates whether the button representing this action will appear on the submission page.
    • The third column shows you the number of pages composing the web form for this implementation. (see create and maintain the web form).
    • The 4th and 5th columns indicate the creation and last modification dates for this implementation.
    • In the 6th column, you can find the order in which the button will be displayed on the submission page of this document type.
    • The following 4 columns (level, score, stpage, endtxt) deal with the insertion of this action in an action set.


      An action set is a succession of actions which should be done in a given order when a user starts.
      For example the submission of a document is usually composed of two actions: Submission of Bibliographic Information (SBI) and Fulltext Transfer (FTT) which should be done one after the other.
      When the user starts the submission, we want CDS Submit to get him first in SBI and when he finishes SBI to carry him to FTT.
      SBI and FTT are in this case in the same action set.
      They will both have a level of 1 ("level" is a bad name, it should be "action set number"), SBI will have a score of 1, and FTT a score of 2 (which means it will be started after SBI). If you set the stpage of FTT to 2, the user will be directly carried to the 2nd page of the FTT web form. This value is usually set to 1.
      The endtxt field contains the text which will be display to the user at the end of the first action (here it could be "you now have to transfer your files")

      A single action like "Modify Bibliographic Information" should have the 3 columns to 0,0 and 1.
       


    • Click on the icon in the 12th column ("Edit Submission Pages") to create or edit the web form.
    • Click on the icon in the 13th column ("Edit Functions") to create or edit the function list.
    • The "Edit Submission" column allows you to modify the data (level, status text...) for this implementation.
    • Finally the last column allows you to delete this implementation.
       

     If you chose to clone the implementation from an existing one, the web form as well as the functions list will already be defined. Else you will have to create them from scratch.

    See also:

  • create and maintain the web form
  • create and maintain the data treatment
  •  

     

    Create and maintain the web form

    What is it?

     Create and define the web form used during an action.

    How to get there?

     From the main page of the manager, click on the title of the relevant document type. Then click on the icon in the "Edit Submission Pages" column of the relevant line.

    List of the form pages

     A web form can be split over several pages. This is a matter of easiness for the user: he will have an overview of all form fields present on the page without having to scroll it. Moreover, each time the user goes from one page to the other, all entered data are saved. If he wants to stop then come back later (or if the browser crashes!) he will be able to get back to the submission at the exact moment he left it.

     Once here:



    you can see the ordered list of already existing pages in the web form. In this example there are 4 pages. You can then:
    • Move one page from one place to an other, using the small blue arrows under each page number.
    • Suppress one page by clicking on the relevant red cross.
    • Add a page, by clicking the "ADD A PAGE" button!
    • Edit the content of one page by clicking on the page number.
    • Go back to the document main page.

    Edit one form page

     Click on a page number, you then arrive to a place where you can edit this form page.

     A form page is composed of a list of form elements. Each of these form elements is roughly made of an html template and a text displayed before the form field.

     In the first part of the page, you have a preview of what the form will look like to the user:


     Then the second table shows you the list of the form elements present on the page:


     You can then:
    • Move one element from one place to another using the drop-down menus in the first column ("Item No") of the table, or the little blue arrows in the second column.
    • Edit the html template of one form element by clicking on the name of the template in the 3rd column ("Name").
    • Edit one of the form elements by clicking on the icon in the 10th column.
    • delete one form element by clicking on the relevant red cross.
    • Add an element to the page by clicking the "ADD ELEMENT TO PAGE" button.

    Edit the html template of one form element

     In the html template edition page, you can modify the following values:
    • Element type: indicates which html form element to create
    • Aleph code: Aleph users only! - This indicates in which field of the Aleph document database to retrieve the original value when modifying this information (function Create_Modify_Interface of action MBI).
    • Marc Code: MySQL users only! - This indicates in which field of the MySQL document database to retrieve the original value when modifying this information (function Create_Modify_Interface of action MBI).
    • Cookies: indicates whether WebSubmit will set a cookie on the value filled in by the user. If yes, next time the user will come to this submission, the value he has entered last time will be filled in automatically. Note: This feature has been REMOVED.
    • other fields: The other fields help defining the html form element.
    Important warning! Please remember this is a template! This means it can be used in many different web forms/implementations. When you modify this template the modification will take place in each of the implementations this template has been used.

    Edit one form element

     In the form element edition page, you may modify the following values:
    • element label: This is the text displayed before the actual form field.
    • level: can be one of "mandatory" or "optional". If mandatory, the user won't be able to leave this page before filling this field in.
    • short desc: This is the text displayed in the summary window when it is opened.
    • Check: Select here the javascript checking function to be applied to the submitted value of this field
    • Modify Text: This text will be displayed before the form field when modifying the value (action "Modify Record", function "Create_Modify_Interface")

    Add one form element

     Click on the "ADD ELEMENT TO PAGE" button. There you will have to decide which html template field to use ("Element Description code"), and also the field mentioned above.

    Create a new html template

     You have access to the list of all existing html templates by clicking on the "View element descriptions" link in the websubmit admin right menu.
    By clicking on one of them, you will have access to its description.
    If no template corresponds to the one you seek, click on the "ADD NEW ELEMENT DESCRIPTION" button to create one.
     The fields you have to enter in the creation form are the one described in the Edit the html template of one form element section.
    You also have to choose a name for this new element.
    IMPORTANT! The name you choose for your html element is also the name of the file in which webSubmit will save the value entered in this field. This is also the one you will use in your BibConvert configuration. Bibconvert is the program which will convert the data gathered in webSubmit in a formatted XML file for insertion in the documents database.
     Tips:
  • Elements of type "select box" which are used as a mandatory field in a form must start with "<option>Select:</option>"
  • Create and edit a checking function.

     Click on the "View Checks" link in the websubmit admin right menu. You then have access to a list of all the defined javascript functions.
    You can then click on the name of the function you want to modify, or click on the "ADD NEW CHECK" button to create a new javascript function.
    These functions are inserted in the web page when the user is doing his submission. When he clicks on "next page", this function will be called with the value entered by the user as a parameter. If the function returns false, the page does not change and an error message should be output. If the function returns true, everything is correct, so page can be changed.

    See also:

  • create and maintain the data treatment
  •  

     

    Setup the Data Treatment

    What is it?

     At the end of a submission, we have to tell webSubmit what to do with the data it has gathered. This is expressed through one or several lists of functions (we call this the "end script").

    How to get there?

     From the main page of the manager, click on the title of the relevant document type.
    Then click on the icon in the "Edit Functions" column of the relevant line.

    List of functions

     Here is what you may see then (this is the end script list of functions for a document type named "TEST" and action "FTT" - Fulltext Transfer):



     You can see the ordered list of all the functions in the end script. This end script is composed of 2 steps (see the "step" column). The functions composing the first step are called, then there should be action from the user which would trigger step 2 - in the present case the Upload_Files function (last of step 1) allows the user to upload additional files by creating a web form, then when the user finishes, he presses another button created by the function, which ends the process. Functions of step 2 are then called.

     Why implement multiple steps? The reason can vary with the task you want to accomplish. For example with the example above (Fulltext Transfer), we use the first step to allow the upload of multiple additional files (dynamic action) which could not be done in the static web form. In the case of the "Modify Bibliographic Information" action, the first step is used to display the fields the user wants to modify, prefilled with the existing values. The reason is once again that the task we want to realise is dynamic.

     The "score" column is used to order the functions. The function which has the smallest score will be called first, and the largest score will be called last.

     You can then:
    • View and edit the parameters of each function by clicking on the name of the function.
    • Move one function up and down, by using the small blue arrows.
    • Suppress one function by clicking on the relevant red cross.
    • Add a function to the list by clicking the "ADD FUNCTION" button.
    • Go back to the document main page ("FINISHED" button).
     Please note: To pass one function from one step to another, you have to delete it then add it again in the proper step.

    See also:

  • all about functions
  •  

     

    Functions

    Description:

     In webSubmit, each action process is divided into two phases: the gathering of data (through a web form) and the treatment of the data.

     The treatment is organised in a succession of functions, each of which has its own input and output.

     The functions themselves are stored in separate files (one per function) in the /opt/invenio/lib/python/invenio/websubmit_functions directory. A file containing a function MUST be named after the function name itself. For example, a function called "Move_to_Done" MUST be stored in a file called Move_to_Done.py. The case is important here.

     For a description of what should be inside the file, have a look to the "create a new function" page of this guide.

     To each function you can associate one or several parameters, which may have different values according to the document type the function is used for. One parameter may be used for different functions. For example one standard parameter used in several functions is called "edsrn". It contains the name of the file in which the reference of the document is stored.

    See also:

  • create a new function
  • delete a function
  • edit a function
  •  

     

    Creating a New Function

    How to get there?

     Click on the "Available Functions" link in the websubmit admin right menu. Then click on the "Add New Function" button.

    How to do this?

     Enter the name of the new function as well as a text description if you wish.
     You will then reach a page where you can add parameters to your new function.

     Don't forget to add the function file inside the /opt/invenio/lib/python/invenio/websubmit_functions directory and to name the file after the function. Functions must be written in Python. Here is an example implementation of a function:

    /opt/invenio/lib/python/invenio/websubmit_functions/Get_Report_Number.py:

    def Get_Report_Number (parameters,curdir,form): global rn if os.path.exists("%s/%s" % (curdir,parameters['edsrn'])): fp = open("%s/%s" % (curdir,parameters['edsrn']),"r") rn = fp.read() rn = rn.replace("/","_") rn = re.sub("[\n\r ]+","",rn) else: rn = "" return ""

    The function parameters are passed to the function through the parameters dictionary.
    The curdir parameter contains the current submission directory path.
    The form parameter contains the form passed to the current web page for possible reference from inside the function.

    See also:

  • edit a function
  • delete a function
  •  

     

    Removing a Function

    Note

     There are currently no way of deleting a function through this interface. Use the direct MySQL command line interface for this.

    See also:

  • edit a function
  • create a function
  •  

     

    Editing a Function

    What is it?

     Edit a function, add parameters to it...

    How to get there?

     Click on the "Available Functions" link in the websubmit admin right menu.

    How to do this?

     On this page appears a list of all functions defined into the system. Two columns give you access to some features:
    • View function usage Click here to have access to the list of all document types and all actions in which this function is used. Then by clicking on one of the items, you will be given a chance to modify the parameters value for the given document type.
    • View/Edit function details There you will be able to modify the function description, as well as add/withdraw parameters for this function.

    See also:

  • create a new function
  • delete a function
  •  

     

    All functions explained

    Description:

     This page lists and explains all the functions used in the demo provided with the Invenio package. This list is not exhaustive since you can add any new function you need.
     Click on one function name to get its description.
     Please note in this page when we refer to [param] this means the value of the parameter 'param' for a given document type.

    CaseEDS
    Create_Modify_Interface
    Create_Recid
    Finish_Submission
    Get_Info
    Get_Recid
    Get_Report_Number
    Get_Sysno
    Get_TFU_Files
    Insert_Modify_Record
    Insert_Record
    Is_Original_Submitter
    Is_Referee
    Mail_Submitter
    Make_Modify_Record
    Make_Record
    Move_From_Pending
    Move_to_Done
    Move_to_Pending
    Print_Success
    Print_Success_APP
    Print_Success_MBI
    Print_Success_SRV
    Report_Number_Generation
    Send_Approval_Request
    Send_APP_Mail
    Send_Modify_Mail
    Send_SRV_Mail
    Test_Status
    Update_Approval_DB
    Upload_Files


    CaseEDS
    description
    This function may be used if the treatment to be done after a submission depends on a field entered by the user. Typically this is used in an approval interface. If the referee approves then we do this. If he rejects, then we do other thing.
    More specifically, the function gets the value from the file named [casevariable] and compares it with the values stored in [casevalues]. If a value matches, the function directly goes to the corresponding step stored in [casesteps]. If no value is matched, it goes to step [casedefault].
    parameters
    casevariable This parameters contains the name of the file in which the function will get the chosen value.
    Eg: "decision"
    casevalues Contains the list of recognized values to match with the chosen value. Should be a comma separated list of words.
    Eg: "approve,reject"
    casesteps Contains the list of steps corresponding to the values matched in [casevalue]. It should be a comma separated list of numbers
    Eg: "2,3"
    In this example, if the value stored in the file named "decision" is "approved", then the function launches step 2 of this action. If it is "reject", then step 3 is launched.
    casedefault Contains the step number to go by default if no match is found.
    Eg: "4"
    In this example, if the value stored in the file named "decision" is not "approved" nor "reject", then step 4 is launched.


    Create_Modify_Interface
    description
    To be used in the MBI-Modify Record action. It displays a web form allowing the user to modify the fields he chose. The fields are prefilled with the existing values extracted from the documents database. This functions takes the values stored in the [fieldnameMBI] file. This file contains a list of field name separated with "+" (it is usually generated from a multiple select form field). Then the function retrieves the corresponding tag name (marc-21) stored in the element definition. Finally it displays the web form and fills it with the existing values found in the documents database.
    parameters
    fieldnameMBI Contains the name of the file in which the function will find the list of fields the user wants to modify. Depends on the web form configuration.


    Create_Recid
    description
    This function retrieves a new record id from the records database. This record id will then be used to create the XML record afterwards, or to link with the fulltext files. The created id is stored in a file named "SN".
    parameters
    none


    Finish_Submission
    description
    This function stops the data treatment process even if further steps exist. This is used for example in the approval action. In the first step, the program determines whether the user approved or rejected the document (see CaseEDS function description). Then depending on the result, it executes step 2 or step 3. If it executes step 2, then it should continue with step 3 if nothing stopped it. The Finish_Submission function plays this role.
    parameters
    none


    Get_Info
    description
    This function tries to retrieve in the "pending" directory or directly in the documents database, some information about the document: title, original submitter's email and author(s).
    If found, this information is stored in 3 global variables: $emailvalue, $titlevalue, $authorvalue to be used in other functions.
    If not found, an error message is displayed.
    parameters
    authorFile Name of the file in which the author may be found if the document has not yet been integrated (in this case it is still in the "pending" directory).
    emailFile Name of the file in which the email of the original submitter may be found if the document has not yet been integrated (in this case it is still in the "pending" directory).
    titleFile Name of the file in which the title may be found if the document has not yet been integrated (in this case it is still in the "pending" directory).


    Get_Recid
    description
    This function searches for the document in the database and stores the recid of this document in the "SN" file and in a global variable "sysno".
    The function conducts the search based upon the document's report-number (and relies upon the global variable "rn") so the "Get_Report_Number" function should be called before this one.
    This function replaces the older function "Get_Sysno".
    parameters
    none


    Get_Report_Number
    description
    This function gets the value contained in the [edsrn] file and stores it in the reference global variable.
    parameters
    edsrn Name of the file which stores the reference.
    This value depends on the web form configuration you did. It should contain the name of the form element used for storing the reference of the document.


    Get_Sysno
    description
    This function searches for the document in the database and stores the system number of this document in the "SN" file and in a global variable.
    "Get_Report_Number" should be called before.
    Deprecated: Use Get_Recid instead.
    parameters
    none


    Insert_Modify_Record
    description
    This function gets the output of bibconvert and uploads it into the MySQL bibliographical database.
    parameters
    none


    Insert_Record
    description
    This function gets the output of bibFormat and uploads it into the MySQL bibliographical database.
    parameters
    none


    Is_Original_Submitter
    description
    If the authentication module (login) is active in webSubmit, this function compares the current login with the email of the original submitter. If it is the same (or if the current user has superuser rights), we go on. If it differs, an error message is issued.
    parameters
    none


    Is_Referee
    description
    This function checks whether the currently logged user is a referee for this document.
    parameters
    none


    Mail_Submitter
    description
    This function send an email to the submitter to warn him the document he has just submitted has been correctly received.
    parameters
    authorfile Name of the file containing the authors of the document
    titleFile Name of the file containing the title of the document
    emailFile Name of the file containing the email of the submitter of the document
    status Depending on the value of this parameter, the function adds an additional text to the email.
    This parameter can be one of:
    ADDED: The file has been integrated in the database.
    APPROVAL: The file has been sent for approval to a referee.
    or can stay empty.
    edsrn Name of the file containing the reference of the document
    newrnin Name of the file containing the 2nd reference of the document (if any)


    Make_Modify_Record
    description
    This function creates the record file formatted for a direct insertion in the documents database. It uses the BibConvert tool.
    The main difference between all the Make_..._Record functions are the parameters.
    As its name says, this particular function should be used for the modification of a record. (MBI- Modify Record action).
    parameters
    modifyTemplate Name of bibconvert's configuration file used for creating the mysql record.
    sourceTemplate Name of bibconvert's source file.


    Make_Record
    description
    This function creates the record file formatted for a direct insertion in the documents database. It uses the BibConvert tool.
    The main difference between all the Make_..._Record functions are the parameters.
    As its name does not say :), this particular function should be used for the submission of a document.
    parameters
    createTemplate Name of bibconvert's configuration file used for creating the mysql record.
    sourceTemplate Name of bibconvert's source file.


    Move_From_Pending
    description
    This function retrieves the data of a submission which was temporarily stored in the "pending" directory (waiting for an approval for example), and moves it to the current action directory.
    parameters
    none


    Move_to_Done
    description
    This function moves the existing submission directory to the /opt/invenio/var/data/submit/storage/done directory. If the Then it tars and gzips the directory.
    parameters
    none


    Move_to_Pending
    description
    This function moves the existing submission directory to the /opt/invenio/var/data/submit/storage/pending directory. It is used to store temporarily this data until it is approved or...
    parameters
    none


    Print_Success
    description
    This function simply displays a text on the screen, telling the user the submission went fine. To be used in the "Submit New Record" action.
    parameters
    status Depending on the value of this parameter, the function adds an additional text to the email.
    This parameter can be one of:
    ADDED: The file has been integrated in the database.
    APPROVAL: The file has been sent for approval to a referee.
    or can stay empty.
    edsrn Name of the file containing the reference of the document
    newrnin Name of the file containing the 2nd reference of the document (if any)


    Print_Success_APP
    description
    This function simply displays a text on the screen, telling the referee his decision has been taken into account. To be used in the Approve (APP) action.
    parameters
    none


    Print_Success_MBI
    description
    This function simply displays a text on the screen, telling the user the modification went fine. To be used in the Modify Record (MBI) action.
    parameters
    none


    Print_Success_SRV
    description
    This function simply displays a text on the screen, telling the user the revision went fine. To be used in the Submit New File (SRV) action.
    parameters
    none


    Report_Number_Generation
    description
    This function is used to automatically generate a reference number.
    After generating the reference, the function saves it into the [newrnin] file and sets the global variable containing this reference.
    parameters
    autorngen If set to "Y": The reference number is generated.
    If set to "N": The reference number is read from a file ([newrnin])
    If set to "A": The reference number will be the access number of the submission.
    counterpath indicates the file in which the program will find the counter for this reference generation.
    The value of this parameter may contain one of:
    "<PA>categ</PA>": in this case this string is replaced with the content of the file [altrnin]
    "<PA>yy</PA>": in this case this string is replaced by the current year (4 digits) if [altyeargen] is set to "AUTO", or by the content of the [altyeargen] file in any other case. (this content should be formatted as a date (dd/mm/yyyy).
    "<PA>file:name_of_file</PA>": in this case, this string is replaced by the first line of the given file
    "<PA>file*:name_of_file</PA>": in this case, this string is replaced by all the lines of the given file, separated by a dash ('-') character.
    rnformat This is the format used by the program to create the reference. The program computes the value of the parameter and appends a "-" followed by the current value of the counter increased by 1.
    The value of this parameter may contain one of:
    "<PA>categ</PA>": in this case this string is replaced with the content of the file [altrnin]
    "<PA>yy</PA>": in this case this string is replaced by the current year (4 digits) if [altyeargen] is set to "AUTO", or by the content of the [altyeargen] file in any other case. (this content should be formatted as a date (dd/mm/yyyy).
    "<PA>file:name_of_file</PA>": in this case, this string is replaced by the first line of the given file
    "<PA>file*:name_of_file</PA>": in this case, this string is replaced by all the lines of the given file, separated by a dash ('-') character.
    rnin This parameter contains the name of the file in which the program will find the category if needed. The content of thif file will then replace the string <PA>categ</PA> in the reference format or in the counter path.
    yeargen This parameter can be one of:
    "AUTO": in this case the program takes the current 4 digit year.
    "<filename>": in this case the program extract the year from the file which name is <filename>. This file should contain a date (dd/mm/yyyy).
    edsrn Name of the file in which the created reference will be stored.


    Send_Approval_Request
    description
    This function sends an email to the referee in order to start the simple approval process.
    This function is very CERN-specific and should be changed in case of external use.
    Must be called after the Get_Report_Number function.
    parameters
    addressesDAM email addresses of the people who will receive this email (comma separated list). this parameter may contain the <CATEG> string. In which case the variable computed from the [categformatDAM] parameter replaces this string.
    eg.: "<CATEG>-email@cern.ch"
    categformatDAM contains a regular expression used to compute the category of the document given the reference of the document.
    eg.: if [categformatAFP]="TEST-<CATEG>-.*" and the reference of the document is "TEST-CATEGORY1-2001-001", then the computed category equals "CATEGORY1"
    authorfile name of the file in which the authors are stored
    titlefile name of the file in which the title is stored.
    directory parameter used to create the URL to access the files.


    Send_APP_Mail
    description
    Sends an email to warn people that a document has been approved.
    parameters
    addressesAPP email addresses of the people who will receive this email (comma separated list). this parameter may contain the <CATEG> string. In which case the variable computed from the [categformatAFP] parameter replaces this string.
    eg.: "<CATEG>-email@cern.ch"
    categformatAPP contains a regular expression used to compute the category of the document given the reference of the document.
    eg.: if [categformatAFP]="TEST-<CATEG>-.*" and the reference of the document is "TEST-CATEGORY1-2001-001", then the computed category equals "CATEGORY1"
    newrnin Name of the file containing the 2nd reference of the approved document (if any).
    edsrn Name of the file containing the reference of the approved document.


    Send_Modify_Mail
    description
    This function sends an email to warn people a document has been modified and the user his modifications have been taken into account..
    parameters
    addressesMBI email addresses of the people who will receive this email (comma separated list).
    fieldnameMBI name of the file containing the modified fields.
    sourceDoc Long name for the type of document. This name will be displayed in the mail.
    emailfile name of the file in which the email of the modifier will be found.


    Send_SRV_Mail
    description
    This function sends an email to warn people a revision has been carried out.
    parameters
    notefile name of the file in which the note can be found
    emailfile name of the file containing the submitter's email
    addressesSRV email addresses of the people who will receive this email (comma separated list). this parameter may contain the <CATEG> string. In which case the variable computed from the [categformatDAM] parameter replaces this string.
    eg.: "<CATEG>-email@cern.ch"
    categformatDAM contains a regular expression used to compute the category of the document given the reference of the document.
    eg.: if [categformatAFP]="TEST-<CATEG>-.*" and the reference of the document is "TEST-CATEGORY1-2001-001", then the computed category equals "CATEGORY1"


    Test_Status
    description
    This function checks whether the considered document has been requested for approval and is still waiting for approval. It also checks whether the password stored in file "password" of the submission directory corresponds to the password associated with the document..
    parameters
    none


    Update_Approval_DB
    description
    This function updates the approval database when a document has just been approved or rejected. It uses the [categformatDAM] parameter to compute the category of the document.
    Must be called after the Get_Report_Number function.
    parameters
    categformatDAM It contains the regular expression which allows the retrieval of the category from the reference number.
    Eg: if [categformatDAM]="TEST-<CATEG>-.*" and the reference is "TEST-CATEG1-2001-001" then the category will be recognized as "CATEG1".


    Upload_Files
    description
    This function displays the list of already transfered files (main and additional ones), and also outputs an html form for uploading other files (pictures or fulltexts).
    parameters
    maxsize Maximum allowed size for the transfered files (size in bits)
    minsize Minimum allowed size for the transfered files (size in bits)
    iconsize In case the transfered files are pictures (jpg, gif or pdf), the function will automatically try to create icons from them. This parameter indicates the size in pixel of the created icon.
    type This can be one of "fulltext" or "picture". If the type is set to "picture" then the function will try to create icons (uses the ImageMagick's "convert" tool)

    See also:

  • create a new function
  • delete a function
  • edit a function
  •  

     

    Protection and Restriction

    Description:

     In webSubmit, you can restrict the use of some actions on a given document type to a list of users. You can use the webAccess manager for this.

     Let's say you want to restrict the submission of new TEXT documents to a given user. You should then create a role in webAccess which will authorize the action "submit" over doctype "TEXT" and act "SBI" (Submit new record). You can call this role "submitter_TEXT_SBI" for example. Then link the role to the proper users.
     Another example: if you wish to authorize a user to Modify the bibliographic data of PICT documents, you have to create a role which authorize the action "submit" over doctype "PICT" and act "MBI". This role can be called "submitter_PICT_MBI" or whatever you want.

     If no role is defined for a given action and a given document type, then all users will be allowed to use it.

     

     

    Submission Catalogue Organisation

    What is it?

     This feature allows you to organise the way webSubmit main page will look like. You will be able to group document types inside catalogues and order the catalogues the way you wish.

    How to get there?

     Click on the "Organisation" link in the websubmit admin right menu.

    How to do this?

     Once on the "Edit Catalogues page", you will find the currently defined organisation chart in the middle of the page. To the right, one form allows you to create a new catalogue ("Add a Catalogue") and one to add a document type to an existing catalogue ("Add a document type").
     
    • To add a catalogue: Enter the name of your new catalogue in the "Catalogue Name" free text field then choose to which existing catalogue this one will be attached to. If you attach the new one to an already existing catalogue, you can create a sub-catalogue. To actually create it, click on "ADD".
    • To add a document type to a catalogue: Choose in the list of existing "Document type names" the one you want to add to the chart. Then choose to which catalogue the document type will be associated. Click on "ADD" to finalise this action.
    • To withdraw a document type or a catalogue from the chart: Click on the red cross next to the item you want to withdraw. If you withdraw a catalogue all document types attached to it will be withdrawn also (of course the actual document types in webSubmit won't be destroyed!).
    • To move a document type or a catalogue in the chart: Use the small up and down arrows next to the document type/catalogue title.

    See also:

  • Create a New Document Type
  • document types
  •  

     

    BibConvert

    What is it?

     WebSubmit stores the data gathered during a submission in a directory. In this directory each file corresponds to a field saved during the submission.
     BibConvert is used to create a formatted file which will be easy to upload in the bibliographical database from this directory.
     This BibConvert program is called from the Make_Record and Make_Modify_Record functions from the end script system of webSubmit.
     The BibConvert configuration files used by webSubmit are in the /bibconvert/config directory.

     For more info about bibconvert, please see the dedicated guide.

     

     

    FAQ

     Q1. I'd like to be warned each time there is an error, or an important action is made through the manager. Is this possible?
     Q2. Where are all the files stored in this system?
     Q3. How is the documents archive organised?



     Q1. I'd like to be warned each time there is an error, or an important action is made through the manager. Is this possible?
    Yes, it is. Edit the invenio-local.conf file, the "CFG_SITE_ADMIN_EMAIL" definition and set it to your email address. You will then receive all the warning emails issued by the manager.
     Q2. Where are all the files stored in this system?
  • the counter files are here: /opt/invenio/var/data/submit/counters. There are used by the Report_Number_Generation function.
  • all running and completed submissions are stored here: /opt/invenio/var/data/submit/storage.
  • all the document files attached to records are stored here: /opt/invenio/var/data/files.
  • all python functions used by webSubmit are stored here: /opt/invenio/lib/python/invenio/websubmit_functions
  •  Q3. How is the documents archive organised?
    First of all, the documents files attached to records are stored here: /opt/invenio/var/data/files.

    The Upload_Files webSubmit function is used to link a document with a record.

    All documents get an id from the system and are stored in the "bibdoc" table in the database. The link between a document and a record is stored using the "bibdoc_bibrec" table.

    The document id is used to determine where the files are stored. For example the files of document #14 will be stored here: /opt/invenio/var/data/files/g0/14

    The subdirectory g0 is used to split the documents accross the filesystem. The CFG_FILE_DIR_SIZE variable from invenio.conf determines how many documents will be stored under one subdirectory.

    Several files may be stored under the same document directory: they are the different formats and versions of the same document. Versions are indicated by a string of the form ";1.0" concatenated to the name of the file.

    Please see the HOWTO Manage Fulltext Files for more information on the administrative command line tools available to manipulate fulltext files.

    See also:

    notes