Andersen, T P Benda, V Vullierme, B 2002 2002 For the LHC magnet test benches 26 pairs of conventional helium vapour-cooled 600 A current leads are required. The first pair of 600 A current leads has been designed and built by industry and tested at CERN. The main component of the lead is the heat exchanger, which consists of two concentric copper pipes. Special attention was also given to the design of the warm terminal in order to avoid any condensation and to resist at an electrical test of 2 kV. The paper describes construction details and compares calculated and measured values of the main parameters. Bézaguet, Alain-Arthur Rivetti, A Serio, L 2002 2002 Flow measurement of cryogenic fluids is a useful diagnostic tool not only to assess thermal performance of superconducting devices and related components but also for early diagnosis of faulty components/systems and to assure the correct sharing of cryogenic power. It is mainly performed on the recovery at room temperature of vapor from liquid boil-off due to lack of commercially available robust and precise cryogenic mass flow meters. When high-accuracy or fast-time response is needed, or individual gas recovery at room temperature is not available, it is necessary to measure directly the fluid feed at cryogenic temperature. The results of extensive testing of industrially available and in-house developed flowmeters outlining characteristics and advantages of each measuring method are presented.