CERN Accelerating science

Future Circular Collider Documents

Darreres entrades:
2019-04-10
11:12
Simulation and tracking studies for a drift chamber at the FCC-ee experiment / Alipour Tehrani, Niloufar (CERN)
The physics aims at the electron-positron option for the Future Circular Collider (FCC-ee), impose high precision requirements on the vertex and tracking detectors. The detector has also to match the experimental conditions such as the collisions rate and the presence of beam-induced backgrounds. [...]
CERN-ACC-2019-0043.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-04-01
13:58
Industry and outreach event: Milestone M1.12 / Welsch, Carsten Peter (University of Liverpool (GB))
Report on a dedicated event bringing together potential partners from industry and informing different identified target audiences about the advancement of the design for a next generation, collider complex based large-scale research infrastructure for high-energy particle physics..
CERN-ACC-2019-0042.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-04-01
10:26
Manufacturing folder for reference design dipole short model: Deliverable D5.4 / Tommasini, Davide (CERN)
Manufacturing folder for a novel high-field cosine-theta model magnet, suitable for the hadron collider designed in the scope of the EuroCirCol project, which is part of the international Future Circular Collider study..
CERN-ACC-2019-0041.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-03-28
16:53
High-field accelerator dipole conceptual design report: Milestone M5.4 / Tommasini, Davide (CERN)
This milestone marks the consolidated design work consisting of drawings, functional and performance specifications for a dipole model sufficiently long (~1.5 m) to make relevant qualification measurements on performance, field quality and protection in a follow-up project. The design folder corresponding to this milestone has been published in deliverable D5.4..
CERN-ACC-2019-0040.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-03-13
10:38
Initial guidelines for a social cost-benefit analysis of the FCC programme / Bastianin, Andrea (Università degli Studi di Milano - Bicocca, Italy) ; Florio, Massimo (Università degli Studi di Milano, Italy)
A fully-fledged Social Cost Benefit Analysis (CBA) of one of the Future Circular Collider Conceptual Design Report’s (FCC CDR) scenarios would require making assumptions on several key variables relating both with the costs and benefits generated by future research infrastructures (RI) over a very long time-span. Presenting results of such a comprehensive analysis is well beyond the scope of this report. [...]
CERN-ACC-2019-0037.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-03-05
08:55
Preliminary cryogenic-beam-vacuum system design: Milestone M4.5 / Perez Rodriguez, Francisco Jose ; Chiggiato, Paolo (CERN) ; Kersevan, Roberto (CERN)
Integrated report on the cryogenic-beam-vacuum system design, considering all studies and findings so far as input to the preparation of the Conceptual Design Report. Description of the key elements, quantities and data permitting to come to an overall cost estimate of the collider..
CERN-ACC-2019-0035.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-03-01
16:18
Preliminary collimation system design concept and performance estimate: Deliverable D2.6 / Bruce, Roderik (CERN) ; Molson, James (CERN)
Description of the collimation system baseline design including a list of beam-line elements (type, description, quantity, physical element characteristics). Description of the assumptions, requirements and constraints on the infrastructure and services. [...]
CERN-ACC-2019-0034.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-02-28
12:33
Manufacturing process of superconducting magnets: Analysis of manufacturing chain technologies for market-oriented industries / Kretzschmar, Linn (WU Wien) ; Mehner, Barbara ; Hartig, Heinrich (WU Wien) ; Hausberger, Matthias (WU Wien) ; Ldermüller, Frederik (WU Wien) ; Mayrhofer, Ferdinand (WU Wien) ; Schreiber, Daniel (WU Wien) ; Gutleber, Johannes (CERN)
The aim of this investigation was to identify the industrial impact potentials of the key processes needed for the manufacturing of novel high-field superconducting magnets and to find innovative additional applications for these technologies outside the particle-accelerator domain. Suppliers and manufacturing partners of CERN would benefit if the know-how could be used for other markets and to improve their internal efficiency and competitivity on the world-market. [...]
CERN-ACC-2019-0033.- Geneva : CERN, 2019 Fulltext: PDF;

Registre complet - Registres semblants
2019-01-30
16:50
Beam screen model heat load and photo-electrons density analysis: Milestone 4.2 / Perez Rodriguez, Francisco Jose ; Chiggiato, Paolo (CERN)
Develop a computer model of the beam screen and report on the analysis of heat load and photo electron densities under the assumed operation conditions. The analysis is made available on the project's document management system..
CERN-ACC-2019-0025.- Geneva : CERN, 2016 Fulltext: PDF;

Registre complet - Registres semblants
2019-01-30
16:30
Preliminary arc design Baseline: Deliverable D2.4 / Chance, Antoine
In this document we will describe the arc baseline design including a list of beam-line elements (type, description, quantity, physical element characteristics). The taken assumptions, requirements and constraints imposed onto the infrastructure and infrastructure services will be also described..
CERN-ACC-2019-0024.- Geneva : CERN, 2018 Fulltext: PDF;

Registre complet - Registres semblants
Enfocat a:
Future Circular Collider draft documents (53) [restringit]