After the recent incident, we have restored access to the website from outside the CERN network, however access from certain worldwide locations is still being blocked.

CERN Accelerating science

SY Thesis

Posledne pridané:
Design of an Electro-Optic Beam Position Monitor for Unbunched Beams based on Frequency Domain DC Field Measurements / Cristiano, Antonio
Continuous and accurate monitoring of the transverse position of a charged particle beam in an accelerator plays a crucial role in ensuring efficient operation of the accelerator and the success of the conducted physics experiments [...]
CERN-THESIS-2023-386 - 145 p.

Úplný záznam - Podobné záznamy
Evaluation of Different Methods for Runtime Optimization of Longitudinal Phase Space Tomography / Abreu Figueiredo, Bernardo
In order to measure the parameters, and therefore the quality, of the particle beam in the CERN synchrotrons, various methods are used for beam diagnostics [...]
CERN-THESIS-2024-033 - 116 p.

Úplný záznam - Podobné záznamy
Simulations and measurements to improve the longitudinal quality of fixed target beams at the CERN PS and SPS / Naumenko, Oleksandr
Ensuring the delivery of high quality beams from the accelerators to their assigned experiments is one of the primary tasks of CERN [...]
CERN-THESIS-2024-024 - 85 p.

Úplný záznam - Podobné záznamy
Resonance laser ionization scheme development for Pb and Cd / Mancheva, Ralitsa Ivaylova
CERN-THESIS-2022-411 - 63 p.

Úplný záznam - Podobné záznamy
Data-Driven Control Methods for Beam Wire Scanners / Varadan, Vishnu
This thesis delves into the complexities of a prototype Beam Wire Scanner (BWS) with a Tubu- lar Linear Magnetic Coupling (TLMC), a critical instrument in particle accelerators and beam physics experiments [...]
CERN-THESIS-2023-372 - 83 p.

Úplný záznam - Podobné záznamy
Development of a Readout Board for an Optical Beam Loss Monitor based on Cherenkov Radiation at CERN / Lima, Erika
This thesis presents the theory, design, fabrication, and characterization of a sensor electronics board for a novel beam loss monitor based on optical fibres developed at Centre Européenne pour la Recherche Nucléaire (CERN) by the Beam Instrumentation group [...]
CERN-THESIS-2021-377 - Roma : Sapienza Università di Roma, Ingegneria dell’Informazione, Informatica e Statistica, 2021-10-22.

Úplný záznam - Podobné záznamy
Design and implementation of a new Controller for CERN’s sub-ppm stable Current source / Nappi, Valerio
This work describes the design and development of the controller of the CERN DCTT Calibrator (CDC), a critical component in the power converter controls system in CERN’s facilities [...]
CERN-THESIS-2023-335 - 134 p.

Úplný záznam - Podobné záznamy
Génération de trajectoires à la demande pour le contrôleur du Beam Wire-Scanner du CERN / Dieperink, Clément
CERN uses scanners in its particle accelerators to measure the position of particle beams [...]
CERN-THESIS-2023-331 - 78 p.

Úplný záznam - Podobné záznamy
Manipulation radioaktiver Ionenstrahlen mit Hilfe einer Paulfalle und direkte Massenmessungen an neutronenarmen Quecksilberisotopen mit dem ISOLTRAP-Experiment / Schwarz, Stefan
CERN-THESIS-99-085 ; GSI-2015-02513 - 143 p.

Úplný záznam - Podobné záznamy
Scalable Regenerative Power Converters for Accelerator Magnets / Haugen, Krister Leonart
Electromagnets are used at The European Centre for Nuclear Research (CERN) in high-energy physics experiments to direct the charged particle beams [...]
CERN-THESIS-2023-299 - 156 p.

Úplný záznam - Podobné záznamy